618929
49
Zoom out
Zoom in
Previous page
1/52
Next page
English
RQT6091
Troubleshooting
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points,
or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit)
to locate a convenient service center, or consult your dealer for instructions.
If the unit fails to operate properly even when the remedial action suggested above has been taken:
This unit uses a microcomputer to perform a large number of operations. If it fails to operate no matter which button is pressed, disconnect the
power cord, and then wait a few moments before re-connecting it. Then set the time and re-program the timer.
Notes
If something important is going to be recorded, always test-record first to check that the recording turns out properly before proceeding
with the actual recording.
The manufacturer assumes no liability whatsoever for any damages resulting from missed opportunities or accidental erasure that occurs
while conducting recording or play operations due to malfunctioning of or trouble in the unit, or for any incidental damage.
Symptom Cause Remedial action/check Ref
COMMON
No sound. A CD-R or CD-RW with nothing
recorded on it has been inserted.
(“BLANK DISC” is displayed.)
Replace the disc with one on which
tracks have been recorded.
The time display flashes in the dis-
play window.
A power failure has occurred or the
power cord has been disconnected.
Set the clock and re-program the
timer.
41
CD PLAYER
Play fails to start The CD has been inserted upside
down.
Insert it properly with the label side
facing up.
14
Condensation has formed on the
lens.
Turn on the power and wait for a
couple of hours.
Specific parts are not played properly. The CD is scratched. Replace the CD. 14
CDR
Recording is not possible The CD-R or CD-RW was loaded in
the tray upside-down.
Load the disc with the label side up. 15
The CD-R or CD-RW is already
finalized.
Further recording on a finalized CD-
RW is only possible if the Unfinalize
function is used.
Replace with a disc that can be
recorded on.
38
The source being copied is already a
digital copy itself.
Perform analog recording of the
source.
24
There is dust or scratches on the sur-
face of the disc.
Clean the disc using a commercially
available disc cleaner. If this is not
effective, replace the disc.
23
TIMER
Timer fails to start. Present time is not correct.
The timer display fails to appear.
Set the time properly.
Set the timer properly.
41
REMOTE CONTROL
No remote control operations. The batteries in the remote control
have discharged.
Replace them with two fresh batter-
ies (AA, R6, UM-3).
12
The remote control sensor is
exposed to direct sunlight or some
other intense source of light.
Move the unit so that the sensor is
not exposed to direct sunlight, a
lighting fixture or some other intense
source of light.
12
SL-PR300EB.fm Page 49 Thursday, September 27, 2001 7:54 PM
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SLPR300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SLPR300 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info