618719
4
Zoom out
Zoom in
Previous page
1/6
Next page
4
Connecting and positioning
Preparation
Turn off all equipment before connection and read the appropriate operating instructions.
Connect the AC power supply cord after all other connections are complete.
Insert the digital transmitter into the slot.
1 If the surround speaker cables have already been connected
Disconnect the surround speaker cables from
the subwoofer.
2 Connect the surround speaker cables to the
receiver.
Wireless setup diagram
e.g.
Place the digital receiver within approximately 10 m (33 feet) from the home
theater main unit.
[Note[
Do not use more than two surround speakers when using this wireless
system.
Do not use this wireless system near a microwave oven.
Do not place the transmitter or receiver in a metal cabinet or bookshelf.
Connecting the digital transmitter
Connecting the surround speaker cables
to the digital receiver
Digital transmitter
Insert fully until you
hear a click.
Rear of your home theater system
Do not insert or
remove while your
home theater
system is on.
AC IN~
L
R
1
2
3
Flip the tab open.
Insert the cable into the
terminal.
Flip the tab closed.
Click!
To household AC outlet (AC 120 V, 60 Hz)
AC power
supply cord
Color of the cables
i: White or Copper
j: Blue or Silver
Surround
cable (L)
Home theater main unit
Surround speaker
cables
Digital receiver
Refer also to the operating instructions for your home theater system.
1 Power on your home theater system.
2 Power on the receiver.
3 Start play on your home theater system.
RF SECTION
Wireless module
Frequency range 2.402 to 2.480 GHz
No. of channels 79
Bandwidth/Channel 1 MHz
RF output power 14 dBm (Max)
RF output impedance 50
Type of emissions
Data rate 1 Mbps
AMPLIFIER SECTION
Output power
RMS output power
Surround Ch 70 W per channel (4 ), 1 kHz, 10 % THD
FTC output power
Surround Ch 45 W per channel (4 ), 20Hz20kHz, 1% THD
GENERAL
Power supply AC 120 V, 60 Hz
Power consumption Digital transmitter 0.3 W
Digital receiver 35 W
Dimensions (WtHtD)
Digital transmitter 97 mmk47.5 mmk8.5 mm (3.8
zk
1.9
zk
0.3
z
)
Digital receiver 103 mmk215 mmk178 mm (
4
zk
8.5
zk
7.0
z
)
Mass
Digital transmitter 0.03 kg (0.07 Ibs)
Digital receiver 2.1 kg (4.6 Ibs)
Operating temperature range r5 oC to r35 oC (r41 oF to r95 oF)
Operating humidity range 5% to 90% RH (no condensation)
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.
Power on/off
W
[W] ” lights up in the display on
your home theater system.
( [W] ” is flashing page 1,
Troubleshooting guide)
Power indicator
This indicator lights when the unit is turned on.
Wireless link indicator
This indicator lights when the signal strength is
adequate for proper operation.
Power on/off button
Press!
Specifications
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SHFX50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SHFX50 in the language / languages: English, French as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info