7082
19
Zoom out
Zoom in
Previous page
1/64
Next page
TEMP REST
RAISIN
BAKE DOUGH
RAPID ALERT
SANDWICH
TEMP REST
RAISIN
BAKE DOUGH
RAPID ALERT
SANDWICH
TEMP REST
RAISIN
BAKE DOUGH
RAPID ALERT
SANDWICH
Reason/Cause
Condition
Motor protection device
Remedy 2
There has been a 10-minute or
less power cut. (The power plug
has been inadvertently pulled out or
the breaker has activated.)
How to reset/restart
If the interruption in the power supply is
momentary, the operation will not be affected.
If the power is restored within 10 minutes, the
bread maker will operate again. However, the
bread may not turn out well.
Remove the dough and start again using all
new ingredients.
Not baked at all, although
the operation appears to
have proceeded.
Check to see if the kneader mounting shaft can
rotate.
Motor protection device has activated.
This only happens when the unit is
overloaded and an excessive force
is applied to the motor.
After about 30 minutes, the motor
automatically starts running again.
If the unit is overloaded and an excessive force is applied to the motor, the protection device will
stop the motor. After approximately 30 minutes, the motor will automatically start running again. It is
recommended to restart with fresh ingredients.
If the kneading blade is restricted by hard dough, take out the dough. The
unit will restart 30 minutes later.
Check to see if the kneader mounting shaft of the bread pan can rotate.
If it can rotate, restart the bread maker after 30 minutes. If it cannot rotate,
service will be required.
Make sure you did not use
too much or too hard/heavy
ingredients, then start again
using all new ingredients.
Service will
be required.
is on
display.
is on
display.
appears
on
display.
There has been more than 10
minutes power cut. (power failure,
unplugging of the power cord, or a
malfunctioning of household fuse or
breaker).
Leave the unit as it is.
When the unit has cooled to below 40˚C/105˚F,
will disappear from the display window
and the red indicating light will go out.
This indicates that the unit is now ready to use.
The unit is hot (above 40˚C/105˚F).
This may occur during repetitive use.
You must allow the unit to cool down
before reusing.
ALERT
TEMP
TEMP
Display Indications for Abnormal Conditions
Yes
No
-
18
-
Remedy 1
English
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SD207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SD207 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info