618696

Panasonic SCVK92D Manual

28
Zoom out
Zoom in
Previous page
1/36
Next page
Using the timers
RQT8169
28
SHIFT
MUTING
, +,
TV VOL
,
TV CH
TV/AV
TV CH
,,
,
REW/
/FF
TV
CLOCK/
TIMER,
SLEEP
DIMMER
PLAY/REC,
AUTO OFF
PHONES
VOL DOWN,
VOL UP
Headphones
(not included)
DEMODISPLAY
The play/record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record a radio station or from the aux source
(record timer).
The play and record timers cannot be used together.
Preparation:
• Turn the unit on and set the clock (A page 9).
• For the play timer, prepare the desired music source (tape/disc/
radio/aux), and set the volume.
• For the record timer, check the cassette’s erasure prevention
tabs (A page 23) and insert the tape in deck 2 (A page 23).
Tune to the radio station (A page 22) or select the aux source
(A page 30).
1 Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK
Previous display
RECPLAY
rPLAY: to set the play timer
rREC: to set the record timer
(Proceed to the next step within 7 seconds)
2 ON time setting
Press [
gg
gg
g, REW/
44
44
4] or [
ff
ff
f,
33
33
3/FF] to set the start
time.
Press [CLOCK/TIMER].
OFF time setting
Repeat steps and .
Using the timers
The play/record timer
3 Press [
rr
rr
rPLAY/REC] to display the timer indicator.
Every time you press the button:
RECPLAY
(off)
rPLAY: to turn the play timer on
rREC: to turn the record timer on
(The indicator doesn’t appear if the start and finish times or the
clock hasn’t been set.)
4 Press [
ff
ff
f] to turn the unit off.
The unit must be off for the timers to operate.
• Play timer: Play will start in the set condition at the set
time with volume increasing gradually to the
set level.
• Record timer: The unit comes on 30 seconds before the set
time with the volume muted.
To cancel the timer
Press [rPLAY/REC] to clear the timer indicator from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when the unit is on)
To change the play/record times
Do steps 1, 2 and 4.
To change the source or volume
1. Press [rPLAY/REC] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 3 to 4.
To check the settings
Press [CLOCK/TIMER] while the unit is on to select “rPLAY” or
“rREC”.
The settings are shown in the following order:
Play timer: start time→finish time→source→volume
Record timer: start time→finish time→source
To check the settings while the unit is off, press [CLOCK/TIMER]
twice.
If you use the unit after the timers are set
After using, check that the correct tape/disc(s) are loaded before
turning the unit off.
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If you selected AUX as the source, when the timer comes on, the
unit turns on and engages “AUX” as the source. If you want to
playback or record from a connected unit, set that unit’s timer to
the same time. (See the connected unit’s instruction manual.)
The sleep timer
This timer turns the unit off after a set time.
While enjoying the desired source:
Press [SHIFT] + [SLEEP] to select the time (minutes).
Every time you press the button:
SLEEP 30
SLEEP 60 SLEEP 90 SLEEP 120
SLEEPOFF
To cancel the sleep timer
Press [SHIFT]+[SLEEP] to select “SLEEPOFF”.
To confirm the remaining time
Press [SHIFT]+[SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the setting
Press [SHIFT]+[SLEEP] to select the new setting.
You can use the sleep timer in combination with the play/record
timer.
Make sure the unit is off before the play/record timer’s start time.
Note
The sleep timer will be turned off when you start recording.
Using the timers
RQT8169(28_29)new1 4/20/05, 11:34 AM28
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCVK92D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCVK92D in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info