618690
27
Zoom out
Zoom in
Previous page
1/36
Next page
Sound field and sound quality
27
RQT8169
Using the Manual Equalizer (MANUAL EQ)
Create your own sound quality effects.
1 Press and hold [MANUAL EQ] until MANUAL EQ
appears.
2 (Within 12 seconds)
Change the sound quality with the cursor buttons.
Select the sound range to be adjusted with [;] or [:].
BASSMID TREBLE
Adjust the level with [8] or [9].
(–3 to +3)
Repeat step 2 to set the desired sound quality.
The original display is restored on the display panel in about
3 seconds.
To cancel
Press [SOUND EQ] to select “EQ-OFF”.
The changes you make are stored and automatically recalled the
next time you select “MANUAL EQ”.
Using the Super Sound Equalizer
Turning on the super sound equalizer gives you a more powerful sound.
Press [S.SOUND EQ] (main unit: [SUPER SOUND EQ]).
The “S.SOUND EQ” indicator lights up.
Every time you press the button:
S.SOUND EQ 1 S.SOUND EQ 2
S.SOUND EQ OFF
To cancel
Press [S.SOUND EQ] (main unit: [SUPER SOUND EQ]) to turn off
the indicator.
Subwoofer level
VK92D
VK82D
Press [SHIFT] + [SUBWOOFER] (main unit: [SUBWOOFER]).
Every time you press the button:
SUB W1SUB W2SUB W3 (factory preset)SUB W4
Super Woofer
VK72D
Press [SHIFT] + [S.WOOFER] (main unit: [S.WOOFER]).
Every time you press the button:
SUPER WOOFER ON SUPER WOOFER OFF
Speaker level adjustments
This is one of the ways to get appropriate surround effects.
Preparation:
Press [:, DVD/CD] and then [L] (main unit: [L STOP]).
1 While stopped and no on-screen display is shown
Press [SHIFT] + [TEST] to output a test signal.
L: Front left
C: Center
R: Front right
RS: Right surround
LS: Left surround
There is no output from SW (subwoofer) channel.
2 Press [, + VOLUME] (main unit: [VOL DOWN, VOL
UP]) to set the volume level normally used for
listening.
3 Press [8] (increase) or [9] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS: 6 dB to +6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
While outputting the test signal, press [;, :].
Adjust the speaker level to the same level as the front
speakers.
To stop the test signal
Press [SHIFT]+[TEST] again.
LL
LL
L To adjust speaker level during play
(Effective when playing multi-channel audio or Dolby Pro
Logic II or Super Surround is on.)
1 Press [SHIFT] + [CH SEL] to select the speaker.
LCRRSLSSW
SW: Subwoofer
You can adjust SW only if the disc includes a subwoofer
channel.
SW does not appear on the display and is not adjustable
when Dolby Pro Logic II is turned on.
S appears on the display when MUSIC or MOVIE is
selected with Super Surround (A page 26). In this case, you
can adjust both surround speaker levels at the same time
using [8, 9].
S: 6 dB to +6 dB
2 Press [8] (increase) or [9] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW: 6 dB to +6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
While L or R is selected, press [;, :].
Multi Re-master Enjoying more
natural sound
RAM
DVD-A
DVD-V
CD
VCD
Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher
frequency signals not recorded on the disc.
WMA
MP3
Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give
you a sound closer to the original.
During play
Every time you press [SHIFT] + [M.RE-MASTER]
(main unit: [MULTI RE-MASTER]):
Setting
RAM
DVD-A
DVD-V
CD
VCD
WMA
MP3
Type of music Effect level
1 High tempo (e.g., pop and rock) Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
Off Off Off
RQT8169(26_27)new1 4/20/05, 11:33 AM27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCVK82D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCVK82D in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info