618690
22
Zoom out
Zoom in
Previous page
1/36
Next page
The radio
RQT8169
22
Manual tuning
1 Press [TUNER/AUX] (main unit: [TUNER/BAND]) to
select “FM” or “AM”.
The unit comes on.
2 Press [(] or [)] (main unit: [REW/
44
44
4/g] or
[f/
33
33
3/FF]) to select the frequency.
Press and hold [(] or [)] (main unit: [REW/4/g] or
[f/3 /FF]) until the frequency starts scrolling to start automatic
tuning. Tuning stops when a station is found.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being received.
LL
LL
L If noise is excessive in FM
Press [PLAY MODE] to display “MONO”.
Monaural sound is selected and noise reduces when reception is
weak.
Press [PLAY MODE] again to cancel the mode.
“MONO” is also canceled if the frequency is changed.
The radio
For Saudi Arabia, Kuwait and Southeast Asia
LL
LL
L AM allocation setting (main unit only)
The step is factory-set to 9 kHz, but you can change it to receive
broadcasts allocated to 10 kHz steps.
1. Select “FM”.
2. Press and hold [TUNER/BAND].
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The minimum
frequency changes and the step is changed.
To return to the original step, repeat the above steps.
Note
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared. Preset them again.
Preset tuning
Remote control only
There are two methods of pre-setting stations.
Automatic presetting :All the stations the tuner can receive are
preset.
Manual presetting :You can select the stations to preset and
the order they are preset in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/AUX] to select “FM” or “AM”.
Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency where pre-setting is to begin.
Press [SHIFT] + [TUNER PGM] until the frequency
changes.
The tuner presets all the stations it can receive into the channels in
ascending order. The last station to be set is then played.
Manual presetting
Pre-set the stations one at a time.
1 Tune to the station (A see left).
2 Press [SHIFT] + [TUNER PGM].
3 While “PGM” is flashing on the display
Press the numbered buttons to select a channel.
Alternatively, press [g, REW/4] or [f, 3 /FF] then press
[SHIFT]+[TUNER PGM].
The station occupying a channel is erased if another station is
preset in that channel.
Selecting channels
Remote control only
1 Press [TUNER/AUX] to select “FM” or “AM”.
2 Press the numbered buttons or [g, REW/
44
44
4] or
[f,
33
33
3/FF] to select the channel.
To select a 2-digit number
e.g. 12: [h10] A [1] A[2].
PLAY MODE
TUNER PGM
, DVD/CD
, TAPE
,,
,
TUNER/AUX
REW/
/FF
,
Numbered
buttons
SHIFT
DECK 2
DECK 2
, DVD/CD
STOP
REC
DECK 1/2
DECK 1
DECK 1
TUNER/BAND
REW/ / ,
/ /FF
, TAPE
The radio
RQT8169(22_23)new1 4/18/05, 3:29 PM22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCVK82D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCVK82D in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info