618674
33
Zoom out
Zoom in
Previous page
1/36
Next page
33
RQTV0128
LANG - 5 LANG - 4 FRANÇAIS DANSK
Troubleshooting guide (continued)
Unit displays Page
Although the unit is on
standby mode, the display
lights up and changes
continuously.
Turn off the demo function.
If you set the clock, demo function will be turned off automatically.
6
The display is dark.
Press and hold [– DIMMER] to brighten the display.
9
“NO PLAY”
You inserted a disc the unit cannot play; insert one that can.
You inserted a blank disc.
7
“NO DISC”
You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly.
10
“F61”
Check and correct the speaker cord connections.
If this does not x the problem, there is a power supply problem. Consult the
dealer.
5
“DVD U11”
Disc is dirty. Wipe it clean.
7
“ERROR”
Incorrect operation performed. Read the instructions and try again.
“DVD H
stands for a number.
Trouble may have occurred. The number following “Hdepends on the status of
the unit.
Turn the unit off and back to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified
service person.
Television displays
“This disc may not be
played in your region”
You can only play DVD-Video if their region number is the same or includes the
same region number as the unit or if the DVD Video is marked “ALL. Confirm
the region number for the unit on the back of the main unit.
Cover
No on-screen display.
Select “On” in “On-Screen Messages” in “Display” tab.
19
The operation is prohibited by the unit or disc.
“Cannot display group xx,
content xx”
You are trying to display incompatible contents.
“Check the disc”
This disc may be dirty.
7
“Authorization Error”
You are trying to play the DivX VOD content that was purchased with a different
registration code. You cannot play the content on this unit.
DivX
20
“Rented Movie Expired”
“Rental Expired”
The DivX VOD content has zero remaining plays. You cannot play it.
DivX
20
Using the cassette deck
Poor quality sound.
Clean the heads.
30
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with
adhesive tape.
24
Disc trays
Disc tray(s) cannot open.
“CHGR ERR” is displayed.
Press [
/I] to release the jammed tray(s) as the unit will switch off. Switch it on
again and the tray(s) will initialize to the previous tray(s) condition.
If this still does not fix the problem, please consult the dealer.
10
Memory reset (Initialization)
When the following situations occur, refer to the instructions
below to reset the memory:
There is no response when buttons are pressed.
You want to clear and reset the memory contents.
To reset memory
1 Disconnect the AC power supply cord. (Wait at least 3
minutes before proceeding to step 2)
2 While pressing and holding down [ /I] on the main
unit, reconnect the AC power supply cord.
“– – – – – – – – – appears on the display.
3 Release [ /I].
All the settings are returned to the factory preset.
You will need to reset the memory items.
Troubleshooting guide
RQTV0128-2L_1En.indd 33 2/10/06 3:45:20 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCVK450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCVK450 in the language / languages: English as an attachment in your email.

The manual is 7,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info