618625
38
Zoom out
Zoom in
Previous page
1/44
Next page
38
Troubleshooting guide
RQTX0089
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
solutions indicated in the chart do not solve the problem, consult your dealer for instructions.
Power
No power. Insert the AC mains lead securely. 11
The unit is automatically
switched to standby
mode.
The Sleep timer was working and had reached the set time limit. 14
Unit displays
The display is dark. Select “BRIGHT” in “FL DIMMER” in the “OTHERS” menu. 26
“NO PLAY” You inserted a disc the unit cannot play; insert one it can.
You inserted a blank disc.
You inserted a disc that has not been finalized.
36
“NO DISC” You have not inserted a disc; insert one.
You have not inserted the disc correctly; insert it correctly.
16
“OVER CURRENT
ERROR”
The USB device is drawing too much power. Switch to DVD/CD mode,
remove the USB and turn the unit off.
“F61” Check and correct the speaker cable connections.
If this does not fix the problem, consult the dealer.
9
“F76” There is a power supply problem. Consult the dealer.
“DVD U11” Disc may be dirty. Wipe it clean. 43
“ERROR” Incorrect operation performed. Read the instructions and try again.
“DVD H∑∑
“DVD F∑∑
stands for a number.
Trouble may have occurred. The numbers following “H” and “F” depend on
the status of the unit. Turn the unit off and then back on. Alternatively, turn
the unit off, disconnect the AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a
qualified service person.
[PT467]
[W1] ” is flashing.
There is no link between this unit and the wireless system. Check that the
wireless system is plugged into the AC mains socket and is turned on.
Ensure that the digital transmitter is fully inserted into the slot of this unit.
8, 11
8
“U70
stands for a number.
The actual number following
“U70” will depend on the
state of this unit.
The HDMI connection acts unusually.
The connected equipment is not HDMI-compatible.
Please use HDMI cables that have the HDMI logo (as shown on the cover).
The HDMI cable is too long.
The HDMI cable is damaged.
“REMOTE 1” or
“REMOTE 2”
Match the modes on this unit and remote control. Depending on the number
being displayed (“1” or “2”), press and hold [OK] and the corresponding
numbered button ([1] or [2]) for at least 2 seconds.
14
“LOADING” The iPod is not ready. Wait for this display to disappear.
Disconnect the iPod, and then reconnect it firmly.
34
Body5.fm Page 38 Monday, January 28, 2008 5:58 PM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCPT467 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCPT467 in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCPT467

Panasonic SCPT467 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info