618440
37
Zoom out
Zoom in
Previous page
1/40
Next page
37
RQT7502
Reference
Picture
Picture distorted.
No picture.
The picture shown on the television
is not normal.
(The sides of the picture are
cut off, the picture is stretched
horizontally, or black bands appear
at the top and bottom
of the screen.)
For Saudi Arabia, Kuwait, the Middle East
and
Southeast Asia
There is ghosting when
progressive output is on.
Picture quality is poor.
The picture on the television
disappears or stripes appear
on the screen.
Menus not displayed correctly.
Some distortion is normal during SEARCH.
Check the connection.
Make sure the television is on.
Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
Go to “Video” tab in the SETUP menus, and change “TV Aspect” to suit your television.
Use the television to change the aspect to the correct one.
If your television cannot change the aspect when input is progressive, try
changing 4:3 Aspect in Display Menu.
Ensure that the unit is connected directly to the television, and is not connected
through a video cassette recorder.
Change the size with the zoom function.
Connect to the component video (480P) input terminals on a television compatible
with this unit’s copy guard system. You cannot view progressive video if your
television is not compatible.
Change “Video Output Mode” to “480I” so “PROGRESSIVE” on the display goes
out. This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output.
Check the settings in Picture Menu.
Mobile telephone chargers can cause some disturbance.
The location and orientation of the antenna are incorrect. If you are using an
indoor antenna, change to an outdoor antenna.
The television antenna wire is too close to the unit. Separate the antenna wire of
the television from the unit.
Change the zoom ratio to “x1.00”.
Set “Subtitle Position” in Display Menu to “0”.
Set “4:3 Aspect” in Display Menu to “Normal”.
Sound
No sound.
Distorted sound.
Piercing noise comes from the
speakers.
Check the connections.
Turn the volume up.
Turn muting off.
Turn Advanced surround off if it causes distortion.
Switch off the unit, determine and correct the causes, then switch the unit on.
Causes include:
– Shorting (bare wires touching) of positive and negative speaker wires.
– Using speakers with an impedance lower than that rated for this unit.
– Straining of the speakers through excessive volume or power.
– Using the unit in a hot environment without proper ventilation.
If you have connected this unit to other equipment through the OPTICAL OUT
terminal, ensure you have selected the correct settings for “Dolby Digital”, “DTS
Digital Surround” and “MPEG
\
” in the SETUP menus’ “Audio” tab.
Unit displays
The display is dark.
DVD NO PLAY
DVD NO DISC
F61
DVD U11
ERROR
DVD HMM
MM stands for a number.
Press [SHIFT]+[DIMMER] until the display returns to the original brightness.
You inserted a disc which the unit cannot play; insert one that can.
You inserted a blank DVD-RAM disc.
You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly.
Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
Disc is dirty. Wipe it clean.
Incorrect operation performed. Read the instructions and try again.
Trouble may have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [f] to switch the unit to the standby mode and then back to ON. Alternatively, press
[f] to switch the unit to the standby mode, disconnect the AC mains lead, and then
reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified
service person.
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Although the unit is on standby
mode, the display lights up and
changes continuously.
Turn off the demo function.
If you set the clock, demo function will be turned off automatically.
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Television displays
You are trying to display incompatible contents.
Go to “Video” tab in the SETUP menus, and select “Enable” in “Progressive Out
(Component)”.
Go to “Display” tab in the SETUP menus, and select “On” for “On-Screen Messages”.
Go to “Disc” tab in the SETUP menus, and select the preferred language for “Menus”.
6
29
28
32
9
9
29
5
12, 39
6
5
32
33
31
7
32
21
21
7
20
20
35
21
21
21
\
Except for Southeast Asia
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Cannot display group xx, content xx.
For Saudi Arabia, Kuwait, the Middle East
and
Southeast Asia
The progressive out is set to
Disable.
No on-screen display.
The discs menu is displayed
in a different language.
RQT7502_36_37_new 3/16/04, 3:14 PM37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCPM39D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCPM39D in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCPM39D

Panasonic SCPM39D User Manual - English - 40 pages

Panasonic SCPM39D User Manual - English - 40 pages

Panasonic SCPM39D User Manual - German - 104 pages

Panasonic SCPM39D User Manual - Dutch, Danish - 104 pages

Panasonic SCPM39D User Manual - French - 104 pages

Panasonic SCPM39D User Manual - French - 40 pages

Panasonic SCPM39D User Manual - Italian - 104 pages

Panasonic SCPM39D User Manual - Polish - 104 pages

Panasonic SCPM39D User Manual - Swedish - 104 pages

Panasonic SCPM39D User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info