618355
7
Zoom out
Zoom in
Previous page
1/120
Next page
VQT4E49
7
English
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the solutions
indicated in the following guide do not solve the problem, consult your
dealer for instructions.
The device cannot be connected.
The pairing of the device was unsuccessful. Read the instructions and try again.
The pairing of the device has been replaced. Do pairing again.
Delete the pairing information for this unit from the Bluetooth
®
device, then
perform the pairing operation again.(See page 5)
Make sure that this unit is not connected to a different device.
The device is connected but audio cannot be heard through this unit.
For some built-in Bluetooth
®
devices, you have to set the audio output to
“SC-MC07” manually. Read the operating instructions of the device for details.
Sound from the device is cut off.
Sound may be disrupted if signals are blocked. When you hold this unit, do not
fully cover this unit with your palm, etc.
The device is out of the 10 m communication range. Move the device nearer to
this unit. (See page 9)
Remove any obstacle between this unit and the device.
Switch off any wireless LAN device.
Select “MODE 1” for stable communication. (See page 6, Switching
transmission)
If the indicator lights up red, please replace the batteries. (See page 4)
When you turn on the unit, audio is not output and the indicator blinks
alternately in red and blue.
A problem has occurred. Disconnect the USB cable from the speaker and
remove the batteries. After waiting for a few moments, reconnect the USB cable
or reinsert the batteries and turn on the power. If the problem continues, contact
the dealer.
When the following situations occur, refer to the instructions below to reset the
memory:
There is no response when buttons are pressed.
You want to clear and reset the memory.
1 Press [Í/I] to turn the power on.
2 Press and hold [Í/I] for about 10 seconds until the indicator turns off.
All the settings are set back to the factory preset.
The pairing device information will have been deleted by the reset, so it will be necessary to
perform pairing again. Delete the pairing information for this unit from the Bluetooth
®
device, then perform the pairing operation again. (See page 5)
Troubleshooting
7
SC-MC07_E.book 7 ページ 2012年2月15日 水曜日 午後5時14分
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCMC07E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCMC07E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info