618351
21
Zoom out
Zoom in
Previous page
1/28
Next page
VQT2R75
21
Convenient functions
Muting
MUTE ” blinks on the display while this function is active.
Press [MUTE].
Press this button again to cancel.
Note
Muting is cancelled when you switch the system to standby.
Muting is also cancelled when you adjust the volume.
Displaying current status
The current statuses (Volume, Sound mode, Input
signal) are displayed in turn.
Press [-DISPLAY, –SETUP].
When you press [-DISPLAY, –SETUP] while each
item is being displayed, the next item is displayed.
(Display example)
Volume
“VOLUME - 32”
Sound mode
• “STANDARD ” (
page 15)
• “DOLBY PL
” (Dolby Pro Logic )
• “DOLBY VS ” (Dolby Virtual Speaker)
etc.
Input signal
• “DOLBY DIGITAL 3 / 2.1 ” (Dolby Digital)
Number of subwoofer signals
Number of surround channels
Number of front and center channels
DUAL PROGRAM / MAIN ” (Reception status of dual audio)
LPCM 2CH”, “LPCM 5.1CH ” (Number of LPCM channels)
etc.
Note
Sampling frequencies are also displayed for the input signal.
(only for 88.2 kHz, 96 kHz)
If unknown signals are input, “NONE ” is displayed.
Factory settings (Reset)
The operation settings for the system will be initialized
to the settings made at the time of factory setting.
1. Press [w][q] to select
RESET
and press [OK].
2. Press [e][r] to select “YES ” and
press [OK].
YES : Reset
NO : Not reset
To cancel, select “NO ”.
Note
All the settings are reset when you select “YES ” and the
input selector automatically switches to “BD/DVD ”.
If you select “NO ”, you will return to step 1. To finish the
setup mode, press [
RETURN] to select “EXIT ” and press
[OK].
To prevent other Panasonic equipment from
operating with this system’s remote control
Other equipment (mini component system, AV amp,
etc.) manufactured by Panasonic may operate with
the remote control operations of this system. In this
case, switch the remote control code of this system
and remote control to “REMOTE 2 ”.
Setting this system
1. Press [w][q] to select
REMOTE
and press [OK].
2. Press [e][r] to select “REMOTE 2
and press [OK].
Factory setting : REMOTE 1
For this setting, after performing the
following “Setting the remote control”
operation, press [
RETURN] to select
EXIT ”, and press [OK] to finish the
setting.
To set the remote control code to 1, select
REMOTE 1 ” in step 2 and press [OK].
Setting the remote control
Press and hold [OK], and then press
[BD/DVD]
(4 seconds or more)
[TV] :
Remote control code 1 (Factory setting)
[BD/DVD] : Remote control code 2
Select the same code number as the one
you have selected in step 2.
To set the remote control code to 1,
press and hold [OK], and press [TV] for 4
seconds or more.
Enter the setup mode before
operations. (
page 18)
Play
Changing this system’s settings / Convenient functions
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHTX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHTX500 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info