618351
7
Zoom out
Zoom in
Previous page
1/28
Next page
VQT2R75
7
Installing and assembling the system
Installation
Setup
example
This system
At least 2 people are necessary for
lifting up the system.
Use a phillips-head screwdriver.
(Do not use an electric screwdriver.)
Avoid unstable places. Choose a flat
location for installation.
Handle the glass doors with enough
care.
Take adequate measures to prevent the TV from
falling down. Make sure to set the caster trays
when the casters are attached.
You can install this system so that it is flush with
the wall at the back. (Depending on the depth of
equipment to install or the type of cable, installing
this system flush with the wall may be impossible.)
Do not place in front of curtains as they may
obstruct the system’s exhaust hole.
If the surface of the wooden floor is soft, the caster
mark may remain.
Do not put anything but a TV on the top board of
this system.
Do not put the following things in particular.
x Putting a hot thing may leave the mark and it
may not come off.
x If you put a vase with water in it and when it falls
down, the water may splash over this system
and this can cause malfunction.
Front side
Soft
c
l
o
th
,
e
t
c
61
6
2
Cushion
Hold and pull
Caster
(Bottom plate)
2 Place your other hand under the bottom of the
front side and lift the system up keeping it
horizontal.
How to lift the system
Removing casters
1 Tilt the system forward slightly then place your
hand under the bottom of the back side.
Front side
Back side
Do not put anything on and in the system when
removing casters. (You do not need to remove the
amplifier and speakers as they are fixed.)
Remove the casters on soft floor materials
(i.e. thick-piled carpet, etc.).
To remove the casters, place the cushions
(
indicated with 61 and 62 on page 4,
packing plan) used at both ends of packaging, and
place this system with its back side facing down on
them.
Connection
Installing and assembling the system
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHTX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHTX500 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info