618347
36
Zoom out
Zoom in
Previous page
1/40
Next page
RQTX0151
36
Problem Possible solution Pages
Common problems
No power. Ensure the AC mains lead is connected. 22
No sound or image after
playback starts.
Select the correct source.
Turn the muting off.
Check that the digital signals can be decoded by this system.
Cannot playback PCM signal with sampling frequency over 96 kHz.
Check connections to other equipment.
Set “DIG ” or “ANLG ” in “Setting input signals”.
Set “AUTO” in “Setting input signals”.
Turn this system off then on again.
24, 25
29
37
16 to 21
33
33
The remote control does not
work.
Replace the batteries if they are worn. 9
The standby indicator lights
up even if the system turned
off.
When you connect the AC mains lead to the household mains socket, the
standby indicator lights up while the system is off. When you turn the system
on, the indicator goes off.
22
No sound from microphone
connected to DVD player
(karaoke).
No sound output from microphone if connection to this system is digital. Change
to analogue connection and input. Make analogue connection to AUX3.
19
There is no DTS audio
output. There is audio
output, but the DTS decoder
indicator is not lit.
Set the DTS Digital Audio Output setting on the DVD player, Blu-ray Disc player
or DVD recorder to “Bitstream”.
Set “DTS” in “Setting input signals”.
33
Sound is not heard when
playing DVD audio.
This may occur due to digital copyright protection of the disc if using digital
connection. This system may not be able to play sources with sampling frequency
over 48 kHz.
Sound stops.
(“F61” appears on the
display for about a second.)
The protection circuit
activates when some
abnormality is detected,
and turns off the system
automatically.
Straining of the speakers through excessive volume or power.
This may occur if you use the system in an extremely hot environment.
Curtains or other objects may be blocking the exhaust hole.
D
Determine and correct the cause, then turn the system on.
(The protection circuit is reset.)
(Consult your dealer if the problem persists.)
“F70  appears on
the display.
(“DSP” or “HDMI” is
displayed in place of .)
Turn off the system, unplug the AC mains lead, and consult your dealer.
“F76” appears on the
display.
(After display, the system
turns off.)
Disconnect the AC mains lead, and consult your dealer.
Sound eld
No sound in surround mode. Set to Dolby Virtual Speaker, Dolby Pro Logic or SFC. 26, 27
Cannot use Dolby Virtual
Speaker, Dolby Pro Logic
or SFC.
You cannot use these features with PCM signals with sampling frequency over
48 kHz. Make analogue connection to AUX3.
You cannot use for Dolby Digital dual sounds.
19
32
HDMI
When using an HDMI
connection, the first few
seconds of sound is cut off.
This may occur if you start play from a chapter on a DVD. The following will
correct the problem.
1
Change the audio output setting on the Blu-ray Disc player, DVD recorder or
DVD player from “Bitstream” to “PCM”.
2
Change input signal setting to “PCM” in “Setting input signals”.
33
The system does not work
properly.
The system does not work properly if you have connected the HDMI input and
output terminals incorrectly. Turn the system off, unplug the AC mains lead, and
make the connections again.
17
Reference
Troubleshooting guide
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
Troubleshooting guide
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHTR310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHTR310 in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCHTR310

Panasonic SCHTR310 User Manual - English - 40 pages

Panasonic SCHTR310 User Manual - German - 120 pages

Panasonic SCHTR310 User Manual - Dutch - 80 pages

Panasonic SCHTR310 User Manual - French, Italian - 120 pages

Panasonic SCHTR310 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info