618125
24
Zoom out
Zoom in
Previous page
1/32
Next page
24
RQT9768
Drücken Sie [ ], um den aktuellen
Modus anzuzeigen.
Während der Modus angezeigt wird,
drücken Sie [ ] zur Auswahl des
Modus.
Die Einstellung ändert sich jedes Mal, wenn [ ] gedrückt
wird.
Die Anzeige für die gewählte Funktion blinkt 10 Sekunden
lang und der Einstellungsmodus wird anschließend
beendet.
Die Einstellung wird beibehalten, bis diese wieder
geändert wird.
Nach Wunsch können Sie den 3D-Surround-Effekt und
den Clear-Mode-Dialogeffekt ausschalten.
Während Sie [SOUND] auf der
Fernbedienung gedrückt halten,
drücken und halten Sie [VOL i] am
Hauptgerät für mehr als
4 Sekunden.
Betätigen Sie, während die
Einstellung angezeigt wird,
[SOUND], um diese zu ändern.
Die Einstellung ändert sich jedes Mal, wenn [SOUND]
gedrückt wird.
Die Anzeige für die gewählte Funktion blinkt 20 Sekunden
lang und der Einstellungsmodus wird anschließend
beendet.
Diese Einstellung wird wieder aktiviert, wenn das
Hauptgerät ausgeschaltet wird.
Bei Auswahl von Off kann die Stärke des Dialogeffektes
nicht eingestellt werden.
Sie können den Dimmermodus ausschalten und die
LED-Anzeigen erleuchtet lassen.
Während Sie [INPUT SELECTOR] auf der
Fernbedienung gedrückt halten, drücken
und halten Sie [s VOL] am Hauptgerät
für mehr als 4 Sekunden gedrückt, um
den Dimmermodus auszuschalten.
Die Anzeige für die aktuelle Einstellung wird heller.
Die Einstellung wird beibehalten, bis diese wieder
geändert wird.
Die Standard-Einstellung dieser Funktion ist eingeschaltet.
Wiederholen Sie den obigen Vorgang, um den
Dimmermodus einzuschalten.
Nach dem Ausführen des Vorgangs wird die Anzeige für die
aktuelle Einstellung wird abgedunkelt.
Ist diese Funktion eingeschaltet, kann dieses Gerät so
eingestellt werden, dass es automatisch in den Standby-
Modus wechselt, wenn kein Signal empfangen, und für
2 Stunden kein Bedienvorgang ausgeführt wird.
Während Sie [DIALOG LEVEL j] auf
der Fernbedienung gedrückt halten,
drücken und halten Sie [INPUT
SELECTOR] am Hauptgerät mehr
als 4 Sekunden lang gedrückt.
Die Anzeige der aktuellen Einstellung blinkt 20 Sek.
Drücken Sie, während die Anzeige
blinkt, [DIALOG LEVEL j], um die
Einstellung zu ändern.
Die Einstellung ändert sich jedes Mal, wenn [DIALOG
LEVEL j] gedrückt wird.
Die Einstellung wird beibehalten, bis diese wieder
geändert wird.
“STANDARD”-Anzeige blinkt:
MODE1 (Werkseinstellung)
Betonung der Konnektivität
“STEREO”-Anzeige blinkt:
MODE2
Betonung der Audioqualität
Bei Verwendung des Dolby
Virtual Speaker-Effekts
“STANDARD”-Anzeige blinkt:
3D-Surround-Effekt und Clear-Mode-
Dialogeffekt ist an.
“STEREO”-Anzeige blinkt:
3D-Surround-Effekt und Clear-Mode-
Dialogeffekt ist aus.
Dimmermodus
Auto-Standby-Funktion
“STANDARD”-Anzeige blinkt:
Die Auto-Standby-Funktion ist an.
“STEREO”-Anzeige blinkt:
Die Auto-Standby-Funktion ist aus.
SC-HTB170EG-RQT9768_ger.book 24 ページ 2013年2月1日 金曜日 午後4時50分
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHTB170EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHTB170EG in the language / languages: German as an attachment in your email.

The manual is 8,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCHTB170EG

Panasonic SCHTB170EG User Manual - English - 36 pages

Panasonic SCHTB170EG Quick start guide - English - 1 pages

Panasonic SCHTB170EG User Manual - German - 24 pages

Panasonic SCHTB170EG User Manual - Dutch - 92 pages

Panasonic SCHTB170EG User Manual - Dutch - 24 pages

Panasonic SCHTB170EG User Manual - Danish - 92 pages

Panasonic SCHTB170EG User Manual - Danish - 24 pages

Panasonic SCHTB170EG User Manual - French - 92 pages

Panasonic SCHTB170EG User Manual - French - 24 pages

Panasonic SCHTB170EG User Manual - Italian - 92 pages

Panasonic SCHTB170EG User Manual - Italian - 24 pages

Panasonic SCHTB170EG User Manual - Polish - 92 pages

Panasonic SCHTB170EG User Manual - Polish - 24 pages

Panasonic SCHTB170EG User Manual - Swedish - 92 pages

Panasonic SCHTB170EG User Manual - Swedish - 24 pages

Panasonic SCHTB170EG User Manual - Spanish - 36 pages

Panasonic SCHTB170EG User Manual - Spanish - 92 pages

Panasonic SCHTB170EG User Manual - Spanish - 24 pages

Panasonic SCHTB170EG User Manual - Finnish - 92 pages

Panasonic SCHTB170EG User Manual - Finnish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info