18722
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
RQT7972
Sound field and sound quality/Other useful functions
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playing source.
Press [SUBWOOFER LEVEL].
When DVD-Video or DVD-RAM is selected
SUB W 4 (factory preset)>SUB W 1>SUB W 2>SUB W 3
^--------------------------------------------------------------------------}
When another source is selected
SUB W 2 (factory preset)>SUB W 3>SUB W 4>SUB W 1
^--------------------------------------------------------------------------}
The setting you make is retained, and recalled every time you play
the same type of source.
This is one of the ways to get appropriate surround effects.
Preparation
Press [DVD/CD].
1 While stopped and no on-screen display is shown
Press [SHIFT]i[TEST] to output a test
signal.
L: Front left C: Center R: Front right
RS: Right surround LS: Left surround
There is no output from SW (subwoofer) channel.
2 Press [VOLUME, r] or [s] to set the
volume level normally used for listening.
3 Press [3] (increase) or [4] (decrease) to
adjust the speaker level for each speaker.
C, RS, LS: `6dB to i6dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
While outputting the test signal, press [2, 1].
Adjust the speaker level to the same level as the front
speakers.
To stop the test signal
Press [SHIFT]i[TEST] again.
To adjust speaker level during play
(Effective when playing multi-channel audio or when Dolby Pro
Logic II or Super Surround is on.)
1 Press [CH SELECT] to select the speaker.
L #C #R #RS #LS #SW
^-------------------------------------------------}
SW: Subwoofer
You can adjust SW only if the disc includes a subwoofer
channel.
“SW” does not appear on the display and is not adjustable
when Dolby Pro Logic II is turned on.
“S” appears on the display when “MUSIC” or “MOVIE” is
selected with Super Surround ( page 30). In this case, you
can adjust both surround speaker levels at the same time
using [3, 4].
S:
`
6dB to
i
6dB
2 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW: `6dB to i6dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
While “L” or “R” is selected, press [2, 1].
Subwoofer level
Speaker level adjustments
SUBWOOFER
LEVEL
PL
DIGITAL
L
S
C R
LS RS
LFE
PRG
RND
PGM
H.BASS
12
DVD
MODE
DISC
T G S.SRND D.MIX SLP
MONO
STCT
TUNED
RAM
RDS PS PTY
W
CD
DTS
SHIFT
TEST
CH SELECT
Other useful functions
Press [SHIFT]i[SLEEP] to select the time (in
minutes).
SLEEP 30_----)SLEEP 60_----)SLEEP 90
^""""" OFF(_ SLEEP 120(__}
To cancel the timer
Press [SHIFT]i[SLEEP] to select “OFF”.
To confirm the remaining time
Press [SHIFT]i[SLEEP] again.
To change the setting
Repeat the procedure from the beginning.
Press [MUTING].
“MUTING” flashes on the unit’s display.
To cancel
Press [MUTING] again or reduce the volume to minimum (– – dB),
then raise it to the required level.
Muting is canceled when you switch the unit to standby.
1 Reduce the volume and connect the
headphones (not included).
Headphone plug type: 3.5 mm (
1
/8z) stereo
2 Adjust headphone volume with
[VOLUME].
Audio is automatically switched to stereo (2-channel).
[Note]
Avoid listening for prolonged periods of time to prevent hearing
damage.
Sleep timer
Muting
Using headphones
SHIFT
SLEEP
QUICK OSD
D.MIX SLP
SETUP
MUTING
PL
DIGITAL
L
S
C R
LS RS
LFE
PRG
RND
PGM
H.BASS
12
DVD
MODE
DISC
T G S.SRND D.MIX SLP
MONO
STCT
TUNED
RAM
RDS PS PTY
W
CD
DTS
M
ain unit only
INPUT
SELECTOR H.BASS PROGRESSIVE CD MODE
TUNE MODE FM MODE MEMORY
OPEN CLOSE DISC EXCHANGE DISC SKIP
TUNING
DOWN UP
PHONES
5 DISC SELECTOR
VOLUME
POWER
1234 5
VOLUME
HT730.book Page 31 Wednesday, June 1, 2005 8:55 AM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT933 in the language / languages: English as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info