18716
43
Zoom out
Zoom in
Previous page
1/52
Next page
43
RQT7921
Other speaker setup options
Attaching to a wall
1 Drive a screw (not included) into a wall.
2 Attaching 4 rubber pads to the rear of the speaker.
3 Fit the speaker securely onto the screw(s) with the
hole(s).
[Note]
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg (22 Ibs) per screw.
Consult a qualified building contractor when attaching the speakers to
wall. Improper attachment may result in damage to the wall and
speakers.
Use of optional speaker cables is recommended for wall-mounted
front speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between
screws as shown in the diagram.
The stands must be able to support over 10 kg (22 Ibs).
The stands must be stable even if the speakers are in a high
position.
3035 mm
(1
3
/16q–1
3
/8q)
7.5–9.4 mm
(
19
/64q
3
/8q)
7.0–9.0 mm
(
9
/32q
11
/32q)
Wall or pillar
3.0–4.0 mm
(
1
/8q
5
/32q)
Center speaker
e.g.
In this position, the
speaker will likely fall
if moved to the left or
right.
Move the speaker
so that the screw is
in this position.
Surround speaker
.....
180 mm
(7
1
/16z)
Front speaker
Rubber pads
Rubber pads
Rubber pads
Speaker stand
(not included)
Plate thickness plus 7 mm to
10 mm (plus
9
/32q to
13
/32q)
Surround speaker
e.g.
5mm (
3
/16q),
pitch 0.8 mm (
1
/32q)
Attach the stands to
these metal screw holes.
60 mm (2
3
/8q)
Optional connections
[A] You can record sound from discs, video cassette
tapes, or radio, etc., to a tape deck.
1 Discs
Press [DVD/VHS] to select “DVD/CD” as the source.
Video cassette tapes
Press [DVD/VHS] to select “VHS” as the source.
Radio
Press [FM/AM] to select “FM” or “AM”.
2 Start recording and play.
Refer to the manual of the other unit for details.
[B] You can play back the sound from a tape deck/laser
disc player, etc., through this unit’s speakers.
1 Press [VHS] to put the remote control in VHS mode.
2 Press [DVD/VHS] to select “VHS” as the source.
3Press [W CH] or [X CH] to select “AV” channel.
4 Start playback from the external source. (For details, refer to
external unit’s operating instructions manual.)
When connecting a record player
We recommend using a record player with a built-in phono equalizer. If
your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
Listening to an external source/
Recording to other equipment
Audio cable (not included)
White (L)
Red (R)
RF IN
RF OUT
LOOP
EXT
75
AM
ANT
FM
ANT
LOOP
ANT
GND
A
DIGITAL
TRANSMITTER
DVD/VHS
EXT
DVD
L
R
COMPONENT
VIDEO OUT
Y
P
B
/
C
B
P
R
/
C
R
S-VIDEO
OUT
IN
OUT
VIDEO
TO
SB-WA830
PLAY
OUT
REC
IN
A B
L
R
RQT7921-P_ENG.book 43 ページ 2005年2月4日 金曜日 午後4時58分
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT830V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT830V in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info