18712
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
RQT7388
Other speaker setup options
[Note]
The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg (22 Ib.) per screw.
Consult a qualified building contractor when attaching the speakers
to wall. Improper attachment may result in damage to the wall and
speakers.
Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
1 Drive a screw (not included) into a
wall.
2 Fit the speaker securely onto the
screw(s) with the hole(s).
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
The stands must be able to support over 10 kg (22 lb.).
The stands must be stable even if the speakers are in a high
position.
Attaching to a wall
Fitting speaker stands (not included)
3035 mm (1
3
/16q–1
3
/8q)
Wall or
pillar
7.5–9.4 mm (
19
/64q
3
/8q)
811 mm (
3
/8q
7
/16q)
Front and surround speakers Center speaker
150 mm
(5
29
/32q)
So that the speaker fits up against the
wall squarely, be sure to press the
speaker cable down into the groove.
In this position, the speaker will likely fall if
moved to the left or right.
Move the speaker so the screw is in this
position.
5 mm (
13
/64q),
pitch 0.8 mm (
1
/32q)
60 mm (2
23
/64q)
Plate thickness
plus 7 to 10 mm
(plus
9
/32q to
25
/64q)
Speaker stand
(not included)
Attach the stands
with these holes.
e.g. Front and surround speaker
Optional connections
[A] You can record sound from discs, video cassette
tapes, or radio, etc., to a tape deck.
1Discs
Press [DVD/VHS] to select “DVD/CD” as the source.
Video cassette tapes
Press [DVD/VHS] to select “VHS” as the source.
Radio
Press [FM/AM] to select “FM” or “AM”.
2 Start recording and play.
Refer to the manual of the other unit for details.
[B] You can playback the sound from a tape deck/laser
disc player, etc., through this unit’s speakers.
1 Press [VHS] to put the remote control in VHS mode.
2 Press [DVD/VHS] to select “VHS” as the source.
3Press [W CH] or [X CH] to select “AU” channel.
4 Start play.
When connecting a record player
We recommend using a record player with a built-in phono equalizer.
If your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
Listening to an external source/
Recording to other equipment
Audio cable (not included)
White (L)
Red (R)
A
Y
P
B
/C
B
P
R
/C
R
COMPONENT
VIDEO OUT
S-VIDEO
OUT
LINE
OUT
LINE
IN
VIDEO
OUT
DVD/
VCR
VIDEO
IN
EXTDVD
L
R
RF IN
RF OUT
LOOP
EXT
75
AM
ANT
FM
ANT
LOOP
ANT
GND
PLAY
OUT
REC
IN
A B
L
R
7388en.book 47 ページ 2003年12月22日 月曜日 午後9時39分
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT820V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT820V in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info