18712
40
Zoom out
Zoom in
Previous page
1/56
Next page
40
RQT7388
Changing settings
1 While VHS MENU is displayed (page 38)
Press [34] to select the “OPTION”
and press [ENTER].
2 Press [34] to select the item and
press [21] to change the setting
(below).
To exit the settings screen
Press [MENU] until the screen disappears.
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
Use “1”, the factory preset, under normal circumstances.
1 While OPTION menu is displayed
Press [34] to select the “REMOTE
CONTROL” and press [ENTER].
2 Press [21] to select the code (1 or 2)
and press [ENTER].
The remote control code on the unit has been set.
3 While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
The remote control code on the remote control has been set.
The following is displayed when you use a remote control with the
different code.
The unit’s remote control code
Change its code to match the unit’s (step 3).
OPTION
OPTION 1/2
OSD ON OFF
TAPE SELECT
T120 T160 T180
BLUE BACK ON OFF
JET NAVIGATOR ON OFF
DELETE NAVIDATA NO YES
JET SEARCH x27 x35
SELECT : s/r:
END :MENU
2 1
OPTION 2/2
MTS MAIN SAP MONO
REMOCON CODE 1 2
DISPLAY
BRIGHT DIM OFF
SELECT : s/r:
END :MENU
2 1
34
34
REMOTE CONTROL
Items Settings (Underlined items are the factory preset.)
OSD (page 41, On-screen display) ON
: Messages appear on the television for about five seconds
after you perform operations.
OFF: Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
T120
: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
BLUE BACK ON
: The screen shows a blue background when you play
unrecorded portions.
OFF
JET NAVIGATOR (page 36) ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 36 to delete data on a single tape.
NO
YES: Then press [ENTER] when you want to delete all the Jet
navigator data.
JET SEARCH (page 30)
Set the speed for JET SEARCH when playing EP and VP tapes.
a27 a
35
Select a27 if the picture is poor at a35.
MTS (page 41, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception
type.
MAIN
: To receive stereo broadcasts.
SAP: To receive SAP when being broadcast.
MONO: To receive monaural broadcasts (e.g., when reception is
poor).
REMOTE CONTROL 1
2
DISPLAY
Set the brightness of the unit's display when the unit is in standby
mode.
BRIGHT: The display is bright all the time.
DIM
: The display dims when the unit is in standby mode.
OFF: The display turns off when the unit is in standby mode.
VHS
7388en.book 40 ページ 2003年12月22日 月曜日 午後9時39分
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT820V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT820V in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info