18704
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
RQT6183
Reference
Some distortion is normal during SEARCH.
Ensure that the television is connected properly. 8
Make sure the television is on.
Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
If “This disc is PAL system. The output is sound only.” is on the television, then you have loaded a
PAL system DVD-Audio and only the audio portion of the disc can be played.
[HT95]
The unit does not output video signals from the VIDEO OUT and S-VIDEO OUT terminals when the
“PROGRESSIVE OUT” indicator is on. Press [PROGRESSIVE OUT] to turn progressive out off.
Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
Go to the Video menu in the ACTION screen, and change “TV Aspect” to suit your television. You
may also need to change the screen mode on the television itself. :
[HT95]
If your television cannot change the aspect when input is progressive
Press [PROGRESSIVE OUT] so the indicator goes out. Output will now be interlace.
Turn progressive output off. This problem is caused by the editing method or material used on the
DVD, but should be corrected if you use interlace output.
Check the settings in the On-Screen Menu Icons’ video menu. E
Adjust the horizontal position with the on-screen menu icons. E
The location and orientation of the antenna are incorrect. If you are using an indoor antenna,
change to an outdoor antenna. Q
The television antenna wire is too close to the unit. Separate the antenna wire of the television
from the unit.
Picture
Unit displays
Picture distorted.
No picture.
The picture shown on the
television is not normal.
[HT95][HT95]
[HT95][HT95]
[HT95]
There is ghosting when
progressive output is on.
Picture quality is poor.
[HT95][HT95]
[HT95][HT95]
[HT95]
The picture is off center when
using progressive output.
The picture on the television
disappears or stripes appear on
the screen.
Press [FL DISPLAY] to turn the display on. K
You inserted a disc the unit cannot play; insert one it can. 5
You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly. <
Check and correct the speaker cord connections. 7
If this does not fix the problem, there is a power supply problem. Call 1-800-211-7262 for support.
The disc is dirty. Wipe it with a soft cloth. 5
Incorrect operation performed. Read the instructions and try again.
The track playing has been recorded with a nonstandard system.
Trouble is likely to have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to
switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified service person.
A problem has occurred with the tray mechanism. The tray will open automatically. Take out the disc and close
the tray. The unit will make the disc changing noises for a few moments and then should operate normally.
Maintenance
To clean this unit, wipe with a soft, damp cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Adjust the position of the FM or AM antenna. 9
Use an outdoor antenna. Q
Turn the television off or separate it from the unit.
Separate the antenna from other cables and cords.
Listening to the radio
Noise is heard.
The stereo indicator flickers or
doesnt light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
This units display is off.
NO PLAY
NO DISC
F61
DVD U11
ERROR
DVD H∑∑
∑∑ stands for a number.
TAKE OUT DISC
Television displays
Go to Display in the ACTION menus, and select “On” for “On-Screen Messages”. L
Press [3, 4] while the rightmost icon is highlighted to move them down. C
Go to Disc in the ACTION menus, and select the preferred language for “Menus”. L
No on-screen display.
On-Screen Menu Icons not
displayed or only partially
displayed on the television.
The discs menu is displayed in a
different language.
Before moving the unit, ensure the disc tray is
empty.
Failure to do so will risk severely damaging the disc and
the unit.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT75 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info