18700
4
Zoom out
Zoom in
Previous page
1/40
Next page
4
RQT7972
Simple setup
Preparation
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
For assembly, use a Phillips-head screwdriver.
Make sure you have all the indicated components before starting assembly, setup, and connection.
There is no difference between the right and left speakers and pipes.
[HT730] [HT733]
You can use the front speakers without assembling with the stands. In this case, attach the included
rubber pads to the base of the speakers. This prevents vibration from causing the speakers to move
or fall over. Use 3 or 4 pads per speaker.
1 Attach the pipes to the bases.
1 Insert pipe B.
2 Secure pipe B to the base.
Ensure the screws are securely fastened.
2 Assemble the pipes.
1 Thread the speaker cable from pipe A through pipe B and
the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the pipe, and then pull
the rest of the cable through the base.
2 Join pipe A to pipe B.
3 Secure the pipes.
Ensure the screws are securely fastened.
3 Attach the pipes to the speakers.
Slot the screw head in between the 2 stoppers of the speaker
groove.
Ensure the pipe is fastened on straight by gradually tightening the
right and left screws alternately until fully tightened.
To prevent a short-circuit, do not cover the connection
terminals with the pipe.
4 Connect the speaker cables.
5 Secure the speaker cables to the bases.
STEP1
Front speaker assembly
The supplied stands are specially designed for
attachment to Panasonic SB-FS730, SB-FS930 or
SB-PF920 front speakers. Use only as indicated in
this setup.
2 Front
speakers
2 Bases
2kpipe A
(with cable)
2kpipe B
4 Pipes 4 Washer
screws
4 Small
screws
4 Bracket
screws
2 Brackets Sheet of
rubber pads
Match these holes when you
insert the pipe.
Base
Pipe B
Washer screws
Phillips-head screwdriver
(not included)
Cable
Pipe B
Cable
Pipe A
Pipe B
Small screws
Pipe A
Pipe B
Bracket screws
Front speaker
Connection terminals
Bracket
Pipe A
Stoppers
Screw head
Rear of the speaker
Twist off the vinyl tips of the
speaker cables.
If the speaker cables do not
have vinyl tips, directly connect
them to the terminals.
_: White
`: Blue
Push!
Bottom of the base
2 Press the
speaker cable
against the base
while threading
it between the
pegs.
Cable
1 Press the speaker
cable into the base
cover groove as far
as possible.
Front speaker assembly
HT730.book Page 4 Wednesday, June 1, 2005 8:55 AM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT730 in the language / languages: English as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info