18696
11
Zoom out
Zoom in
Previous page
1/36
Next page
11
RQT7534
10HBI
10HBI
10HBI
Radio operations
L FM frequency settings
You can change the FM step. The step is factory-set to 0.2 MHz, but
you can change it to receive broadcasts allocated 0.1 MHz steps.
1 Press [TUNER/BAND] to select “FM”.
2 Press and hold [SELECTOR] on the main unit.
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
Note
Any FM/AM frequencies preset in channels will be changed by this
procedure. Preset them again.
Preset tuning
There are two methods of pre-setting stations.
Automatic presetting: All the stations the tuner can receive are
preset.
Manual presetting: You can select the stations to preset and the
order they are preset in.
Up to 15 stations can be set in each, the FM and AM bands.
Automatic presetting
Do the following once
For each, FM and AM.
Tune to the frequency where pre-setting is to begin.
Press and hold [ENTER] until the frequency changes.
¡ Main unit: Press and hold [MEMORY].
The tuner presets all the stations it can receive into the channels in
ascending order.
“SET OK” is displayed when the stations are set. The last
station to be set is then played.
L ERROR is displayed
Presetting was unsuccessful. Preset manually.
Manual presetting
1 Tune to the station (A see left: Manual tuning).
2 Press [ENTER].
3 While PGM is flashing
Press the numbered buttons to select a channel.
Alternatively, press [2 CH 1] then press [ENTER].
The station occupying a channel is erased if another station is
preset in that channel.
Selecting channels
1 Press [TUNER/BAND] to select FM or AM.
2 Press the numbered buttons or [4 CH 3] to select the
channel.
To select a 2-digit number
Example: To select channel 12, press [X10] A [1] A [2]
Control reference guide
TUNER/BAND
FM MODE
MEMORY
3 TUNING 4
SELECTOR
VOLUME,
DOWN, UP
ENTER
Numbered
buttons
( )
4CH3
/TUNE MODE
VOLUME
+
Manual tuning
1 Press [SELECTOR] to select FM or AM.
Each time you press the button:
DVD/CDFMAMTVVCRAUX
¡ Remote control: Press [TUNER/BAND].
2 Press [ /TUNE MODE] to select MANUAL.
Each time you press the button: MANUAL
PRESET
3 Press [3 TUNING] or [TUNING 4] to select the
frequency of the required station.
¡ Remote control: Press [(] or [)].
TUNED: Displayed when a radio station is
tuned.
ST: Displayed when a stereo FM broadcast
is being received.
Press and hold [1 TUNING] or [TUNING 2]
until the frequency starts scrolling to start
automatic tuning. Tuning stops when a
station is found.
4 Adjust the volume.
L If noise is excessive in FM
Press [FM MODE] to display MONO.
Press [FM MODE] again to cancel the mode.
The mode is also canceled when you change
the frequency.
The radio
RQT7534(2)PC(10-11) 11/2/04, 2:19 pm11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT670 in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCHT670

Panasonic SCHT670 User Manual - French - 36 pages

Panasonic SCHT670 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info