Manual Panasonic SCHT1500 (page 17 of 52) (English)

18686

Zoom out

Zoom in

1/52

RQT7619

RECORDING

Entering PlusCode

number is an easy way of timer recording. You

can find them in TV listings in newspapers and magazines.

≥You can enter up to 8 days in advance.

≥VCR Plusi system works only after this unit downloads the

television program list (➡ page 6).

1 Press [VCR Plusr].

2 Press [3, 4] to select “PlusCode”.

3 Press the numbered buttons to enter

the PlusCode number.

≥To correct the number

Press [3] and press [4]. Enter the number again from the

beginning.

4 Press [ENTER].

Repeat steps 1–4 to program other recordings.

≥As long as the setting is not changed, the program is

recorded to the HDD in the recording mode selected by the

unit. To change the setting ➡ page 15, To change the

setting, steps 3–4.

5 Press [TV GUIDE].

Returns to the television screen.

≥The unit is not off. To save power, turn the unit off by

pressing [Í POWER].

≥When using the cable TV box, make sure the cable TV box is

turned on.

∫ To cancel recording when recording has already

begun

Press [∫], then [ENTER] within 5 seconds.

≥You can also press and hold [∫] on the main unit for more than 3

seconds to stop recording.

Using VCR Plusi system to make timer

recordings

Date :

Start Time :

End Time :

Channel :

Quality :

Destination :

PlusCode :

4 / 1 / 04

8 : 00 pm

10 : 00 pm

HDD

=========

FAVORITES

Sat 2:00pm Dodzilla Once

4/3 11:00pm NWBG Once

Sat 3:00pm Bull house Weekly

Sat 3:30pm Be switched Weekly

Sat 4:00pm Baseball Once

LISTINGSMESSAGES SCHEDULE

RECORD

REMOVE

FREQUENCY

INFO.

NWBG

HDD

11:00 11:55

Notes on timer recording

≥“F” lights on the unit’s display to indicate that the unit is in timer

recording standby.

≥“F” flashes when the unit cannot go to timer recording standby.

≥Timer recordings are activated regardless of whether the unit is

turned on/off.

≥Timer recordings begin when the set time is reached even

when recording or when playing.

≥Timer recordings do not begin while transferring (dubbing) in

normal speed mode (➡ page 31).

≥When you program successive timer recordings to start

immediately one after the other, the unit cannot record the part

at the ending of the earlier program (approximately 15

seconds). In addition, when recording to DVD-R, the unit

cannot record the part at the beginning of the later program

(approximately 15 seconds).

≥If you set DST (Daylight Saving Time) to ON when manually

setting the clock (➡ page 7), timer recording may not work

when summer switches to winter and vice versa.

∫ Relief Recording

When the recording drive is set to “DVD” for timer recording and

if the program will not fit onto the disc, the recording drive will be

changed to the “HDD” automatically.

≥If there is no disc in the tray or the disc cannot be recorded on

or when timer recording starts while transferring (dubbing), the

recording drive will be changed to the HDD.

≥The Direct Navigator shows which programs were relief-

recorded (“ ” is displayed.)(➡ page 20).

≥If the time remaining on the HDD is insufficient, as much of the

program as possible will be recorded onto the HDD.

Program Program

Recorded

Not recorded

Recorded

Not recorded [DVD-R]

7619en.book 17 ページ２００４年５月６日　木曜日　午前９時３３分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1500 in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCHT1500

Panasonic SCHT1500 User Manual - German - 164 pages

Panasonic SCHT1500 User Manual - Dutch - 8 pages

Panasonic SCHT1500 User Manual - French, Italian - 164 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic SCHT1500 Manual

Product: