613117
42
Zoom out
Zoom in
Previous page
1/56
Next page
42
RQT7061
SETTINGS
Changing the units settings
Panasonic DVD players and recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
Use “1”, the factory set code, under normal circumstances.
While SETUP menu screen is displayed
1 Press [3, 4] to select “Set Up” and
press [1].
2 Press [3, 4] to select “Remote
Control Code” and press [ENTER].
3 Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
4 While pressing [ENTER] on the remote
control, press and hold for about 2
seconds the numbered button ([1], [2]
or [3]) corresponding to the code you
selected in step 3.
The remote control code on the remote control has been set.
The following display appears when you use a remote control with a
different code.
Change its code to match the unit’s ( step 4).
Enhance sound perception using this feature. Adjust the delay time
for Dolby Digital when receiving multi-channel digital audio
broadcast on satellite or cable TV, or for Dolby Pro Logic II when
Dolby Pro Logic II is turned on.
While SETUP menu screen is displayed
1 Press [3, 4] to select “Audio” and
press [1].
2 Press [3, 4] to select “Speaker” and
press [ENTER].
3 Press [3, 4] to select the delay time
box and press [ENTER].
4 Press [3, 4] to adjust the delay time
and press [ENTER].
Values
If distance a or b is greater than or equal to distance c, set to “0”.
If distance a or b is less than distance c, set as follows.
a Center speaker
b Surround speakers
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
When you are finished
Press [2] to select “Complete” and press [ENTER].
Changing the remote control code
CH
VOLUME
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
CANCEL
123
4
5
6
789
0
100
HOME THEATER TV
STATUS
MULTI REAR
MARKER
S.POSITION
F. R e c
C.FOCUS
REC MODE
CH SELECT
RETURN
P.MEMORY
EQ/SFC
ERASEADD/DLT
PROG/CHECK
L1/OPT
FUNCTIONS
TOP MENU
ENTER
DIRECT NAVIGATOR
MENU
PLAY LIST
MIX
2CH
FRAME
REC
TEST
CM SKIP
SETUP
MUTING
AUDIO
S W. LEVEL
FM/AM
TV/VIDEO
INPUT SELECTOPEN/CLOSE
DISPLAY
DVD
VCR Plus+
POWER
POWER
PRO LOGIC
TIME SLIP
SHIFT
SHIFT
RETURN
3, 4, 2, 1
ENTER
Numbered
buttons
The unit’s remote control code
Changing the delay time (Speaker)
Difference Setting
Approx. 30 cm (1 foot) 1.0 ms
Approx. 60 cm (2 feet) 2.0 ms
Approx. 90 cm (3 feet) 3.0 ms
Approx. 120 cm (4 feet) 4.0 ms
Approx. 150 cm (5 feet) 5.0 ms
Difference Setting
Approx. 150 cm (5 feet) 5.0 ms
Approx. 300 cm (10 feet) 10.0 ms
Approx. 450 cm (15 feet) 15.0 ms
ms
ms
L
Complete
LS
R
SW
C
RS
5.0
0.0
Multi Channel
RETURN
ENTER
SELECT
Center delay time
Surround delay time
LS
RS
L
R
SW
b
c
a
C
7061en.book 42 ページ 2003年6月16日 月曜日 午前10時12分
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info