613117
37
Zoom out
Zoom in
Previous page
1/56
Next page
37
RQT7061
RADIO &
SOUND
This mode is useful if you have to place your
surround speakers near the front speakers due
to the layout of your room.
This mode makes it seem like the sound from
the surround speakers is coming from behind
you.
Press and hold [SHIFT]r[MULTI REAR] for
more than 5 seconds.
Each time you do this:
V. R . S O N
!)V.R .S O FF
This mode makes it seem like sound is coming
from multiple rear surround speakers virtually
when connected with surround speakers.
Press [SHIFT]r[MULTI REAR].
Each time you do this:
M.R.S ON
!)M.R.S OFF
Using this function makes you feel like you are
sitting in the ideal seating position (in the center of
the circle formed by the speakers), even if you
cannot due to the layout of your room.
1 Press
[SHIFT]r[S.POSITION].
2 While “SEAT POSITION” is displayed
Press [3, 4, 2, 1] to select a
position.
To cancel
Press [SHIFT]r[S.POSITION] again.
[Note]
While virtual rear surround is on, the seat position is changed in
three horizontal steps.
Press [S W.LEVEL].
Each time you press the button:
SUB W 1>SUB W 2>SUB W 3>SUB W 4 (factory preset)
^-------------------------------------------------------------}
Adjust the level of the speakers so they are the same apparent level
as the front speakers where you would normally be sitting and
listening. (L, R below, Balance)
Preparation
Dolby Digital and DTS: Turn off the other sound field systems.
Dolby Pro Logic II: Press [SHIFT]i[ÎPRO LOGIC II].
1 Press [SHIFT]r[TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
2 Press [VOLUME r] or [s] to set the volume level normally
used for listening.
3 Press [3] (to increase) or [4] (to decrease).
L, R: ( below, Balance)
C, RS, LS: j6 dB to i6 dB
To stop the test signal, press [SHIFT]i[TEST] again.
To adjust speaker level during play
1 Press [SHIFT]r[CH SELECT] to select the speaker.
LR>Cch>RSch>LSch>SWch
^---------------------------------------------------}
SW: Subwoofer
You can only adjust SW if there is output from the subwoofer
channel.
2 Press [3] (to increase) or [4] (to decrease).
L, R: ( below, Balance)
C, RS, LS: j6 dB to i6 dB
SW: j6 dB to i6 dB
You can adjust the balance of the front speakers.
1 Press [SHIFT]r[CH SELECT] to select “L R”.
2 Press [2, 1] to adjust the “L”, “R” balance.
Virtual Rear Surround
Multi Rear Surround
Seat position
Virtual speakers
V.REAR
Virtual speakers
M.V. REAR
Adjusting the bass
Speaker level adjustments
Balance
7061en.book 37 ページ 2003年6月16日 月曜日 午前10時12分
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info