612856
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
RQT9709
“LEVEL 0”
There is no link between this unit and the wireless network
router.
Try the following operations:
Check that the wireless network router is turned on.
Turn this unit off and on again.
Reset the wireless network settings. (> 11)
If the problem persists, consult your dealer.
“NOCONNECT”
This unit cannot connect to the network.
Check the network connection. (> 11)
“NODEVICE”
The iPod/iPhone device is not inserted correctly. Read the
instructions and try again (> 10).
The USB device is not inserted. Check the connection.
“NO DISC”
Insert the disc to be played (> 10).
“NO MEMORY
There are no preset DAB/DAB+ stations to select. Preset
some channels. (> 16)
“NO PLAY”
A CD that is not in CD-DA or MP3 format is inserted. It
cannot be played.
If there are more than 255 albums or folders (audio and
non-audio), some of the MP3 files in these albums may not
be read and played. Transfer these music albums to another
USB. Alternatively, reformat the USB device and save these
music albums prior to saving the other non-audio folders.
“NO SERVICE”
The station is currently not broadcasting.
“NO SIGNAL”
This station cannot be received. Check your antenna (> 10).
“NOT SUPPORTED”
You have inserted an iPod/iPhone that cannot be played
(> 6). Insert correctly and try again if iPod/iPhone is
compatible.
If the iPod/iPhone is compatible, turn it on before inserting it
to this unit.
“READING”
The unit is checking the CD information. After this display
has disappeared, start operating.
“REMOTE ” (“ ” stands for a number.)
The remote control and this unit are using different codes.
Change the code on the remote control.
When “REMOTE 1” is displayed, press and hold [OK] and
[4] for more than 4 seconds.
When “REMOTE 2” is displayed, press and hold [OK] and
[3] for more than 4 seconds.
“SCAN FAILED”
Stations are not receivable. Check your antenna and try Auto
scanning (> 15).
If “SCAN FAILED” is still displayed find the best signal
reception with the “MANUAL” tuning function. (> 16)
“SCRAMBLED”
The broadcast station being received cannot be accessed.
“START ERROR”
Check the iPhone/iPod touch.
Visit the below website for more information:
http://radio.vtuner.com/panasonic/en/
“USB OVER CURRENT ERROR”
The USB device is drawing too much power. Switch to “CD”
mode, remove the USB and turn the unit off.
SC-HC57DB~RQT9709-1B.book Page 23 Friday, March 2, 2012 3:31 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHC57DBEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHC57DBEB in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info