612852
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
RQTX1262
To utilise these functions, the Bluetooth
®
device must support
AVRCP (Audio Video Remote Control Profile).
This unit cannot transmit data to a Bluetooth
®
device.
When playing iPod/iPhone by Bluetooth
®
with the main unit,
intermittent sound may be experienced if you leave the iPod/
iPhone Bluetooth
®
menu screen active or when making Bluetooth
®
registration and connection. If this occurs, please exit the iPod/
iPhone Bluetooth
®
menu screen.
When playing music by iPod/iPhone via Bluetooth
®
connection and
the iPod/iPhone is connected into this unit iPod/iPhone dock, the
audio will not be re-produced while “BLUETOOTH” is selected.
Select “IPOD” to continue enjoying the music.
You can select the sound input level of the Bluetooth
®
device.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2 Press [SOUND] repeatedly to select “INPUT
LEVEL”.
3 Press [2, 1] to select “0”, “i1” or “i2”.
Select “0” if the sound is distorted.
Press [DISPLAY] repeatedly to view the
information of the current connected device.
BLUETOOTH ---------------------# Connected device name
^-------------------------- Connected profiles(------------------------}
This unit works as a Bluetooth
®
hands-free for your mobile
phones.
This unit does not work with Headset Profile (HSP).
When the mobile phone is too close to the microphone of this unit,
noise may occur. Always keep the mobile phone away from the
microphone of this unit when making a call.
The audio from a disc will be paused while calling in hands-free
mode.
1 Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2 Press [ MENU] to display “DISCONNECT?”
and then press [OK].
A confirmation message is displayed.
3 Press [2, 1] to select “YES” and then press
[OK].
The connection can also be stopped when you disable Bluetooth
®
transmission on the connected Bluetooth
®
device.
Preparation
Press [ , iPod] repeatedly to select “BLUETOOTH”.
These functions are unavailable if a device is connected.
Disconnect the Bluetooth
®
devices to display these functions.
To register more devices
1 Press [ MENU] repeatedly to select
“NEW DEV.” and then press [OK].
The unit enters pairing mode and “PAIRING” starts blinking
on the display.
2 While this unit is in pairing mode, access the
Bluetooth
®
menu of the Bluetooth
®
device and
execute a Bluetooth
®
search to find this unit
(SC-HC55).
If prompted for the passkey, enter “0000”.
To select communication quality
1 Press [ MENU] repeatedly to select
“LINK MODE”.
2 Press [2, 1] to select the following modes and
then press [OK].
To select Auto Link mode
1 Press [ MENU] repeatedly to select
“AUTO LINK”.
2 Press [2, 1] to select the following modes and
then press [OK].
When “LINKING” is displayed, pressing [ MENU] is invalid.
Auto Link works only if your device supports A2DP.
The communication quality settings also depend on the settings on
the connected device. If the communication quality of the
connected device is set for stable communication, the quality of the
audio will remain low even if this unit is set to “MODE 2”.
Input level
Display function
Hands-Free Profile (HFP)
To answer a call
(“IN CALL” blinks)
Press [ ]. “CALLING” starts blinking on
the display (Talk into the unit’s
microphone).
Press [ ] again to transfer the call to the
mobile phones (“TRANSFER” blinks. You
may now converse using the mobile
phone).
To cancel a call Press [ ].
To adjust the
sound volume
Press [+, VOL ,–] (Adjustable from
“TEL VOL 1” to “TEL VOL 10”).
To mute the
microphone
Press [MUTE]. Press again to cancel.
(During “MIC MUTE”, the caller is not able
to hear your voice).
Disconnecting a Bluetooth
®
device
Advanced functions
MODE 1: Connection with emphasis on communication
stability
MODE 2: Connection with high bit rate for good audio quality
(Communication might easily be disconnected in
this mode, select “MODE 1” if this occurs).
ON: This unit will automatically select “BLUETOOTH”
when a Bluetooth
®
device is connected.
OFF
SC-HC55_35-RQTX1262.book 19 ページ 2011年4月1日 金曜日 午前11時34分
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHC55DBEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHC55DBEB in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info