612832
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
RQTX1262
With this function it is possible to check the signal reception
quality of a selected frequency.
If the reception quality is poor, try adjusting the antenna.
Preparation
Press [EXT-IN, RADIO] repeatedly to select “DAB”.
1 Press [RADIO MENU] repeatedly to select
“SIGNAL QUALITY”.
2 Press [2, 1] to select the frequency.
After displaying the frequency, the current reception quality
is displayed.
3 To continue checking the quality of other frequencies
Press [2, 1] again and select the desired
frequency.
To exit
Press [RADIO MENU].
If the antenna has been adjusted, perform Auto scanning and
update the station memory. (> below)
When new stations are added or when the antenna has been
moved, reperform the Auto scan.
1 Press [RADIO MENU] repeatedly to select
“AUTOSCAN” and then press [OK].
2 While “START ?” is flashing,
Press [OK].
When updating the memory with Auto scan, preset stations will be
erased. Preset them again (> right).
When a frequency is tuned using Auto scanning, the ensemble
corresponding to the frequency is displayed for approximately 2
seconds.
Total stations received is displayed for approximately 2 seconds.
On this unit, there are 2 ways of selecting the desired station.
Preparation
Press [EXT-IN, RADIO] repeatedly to select “DAB”.
Make sure that the initial settings are made.
(> 14)
To select by station (alphanumeric order)
Press [6] or [5] to select a station.
To select by preset
Press [:] or [9] to select a preset station.
Alternatively, press the numeric buttons to select the channel.
To select by preset, make sure that stations have already been
preset manually. (> below)
You can preset up to 20 DAB channels.
Preparation
Press [EXT-IN, RADIO] repeatedly to select “DAB”.
1 Press [6] or [5] to select the station.
2 Press [PROGRAM].
3 Press the numeric buttons to select the
channel.
You cannot preset stations when the station is not broadcasting or
when the secondary service is selected.
The station occupying a channel is erased if another station is
preset in that channel.
If the station is providing secondary service, “ ” will be
displayed. It is possible to change between the primary and
secondary service.
Preparation
While listening to the primary service.
1 Press [RADIO MENU] repeatedly to select
“SECONDARY” and then press [OK].
2 Press [2, 1] to select the secondary service
and press [OK].
The setting will go back to primary service when changes are made
(e.g. frequency is changed).
Checking the DAB signal
reception quality
To re-Auto scan DAB stations
Frequency
block Frequency
Listening to DAB stations
Presetting stations manually
Listening to the secondary
service
SC-HC55_35-RQTX1262.book 15 ページ 2011年4月1日 金曜日 午前11時34分
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHC35DBEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHC35DBEB in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info