612798
10
Zoom out
Zoom in
Previous page
1/36
Next page
10
RQT7035
Simple setup
(Center and surround speakers only)
[Note]
The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg per screw.
1
Screw a screw (not included) into the wall.
2 Fit the speaker securely onto the
screw with the hole.
Preparation
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
The stands must be able to support over 10 kg.
The stands must be stable even if the speakers are in a high
position.
Notes on speaker use
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage.
–When playing distorted sound.
–When the speakers are receiving howling from a record player,
noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but the
picture may be affected with some televisions and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
Other speaker setup options
Attaching to a wall
3035 mm
Wall
7.5–9.5 mm
7–9 mm
Speaker feet
Speaker feet
Fitting speaker stands (optional)
5 mm
pitch 0.8 mm
60 mm
Attach the stands with
these holes.
Plate thickness plus 7 to 10 mm
Speaker stand
(not included)
Caution
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCDT110EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCDT110EB in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info