612781
31
Zoom out
Zoom in
Previous page
1/48
Next page
Operations
SQT0935
31
The default setting is underlined. Changed settings will
be kept until it is changed again, unless otherwise
indicated.
REAR LEVEL
You can adjust the output
level of the rear surround
speakers. Pair SC-ALL2 (sold
separately) with this system
beforehand. (> 32)
1
Press [4][3] to select the output
level of the left surround speaker
and press [OK]. (REAR L)
2 Press [4][3] to select the output
level of the right surround speaker
and press [OK]. (REAR R)
You can adjust the output level
between j6 and i6. The default
setting is 0.
If only one rear surround speaker
has been paired or if both are set
in the same channel, either “REAR
L” or “REAR R” is displayed.
“REAR LEVEL” is not indicated on
the display when “REAR
SPEAKER” is set to “OFF” or a
rear surround speaker is not linked
to this system.
NET SETUP
You can choose how to
connect to a network.
For details, refer to “Step 4
Network settings” (> 19)
NET INFO
You can confirm the IP
address allocated to this
system, the MAC address of
this system, and the network
name (SSID) of this system.
IP ADDR
MAC ADDR
SSID
Characters that cannot be
displayed are replaced with “ ”.
SIGNAL
LEVEL
You can check the signal
strength of the wireless
connection.
The signal strength is displayed
when you press [OK] while
“SIGNAL LEVEL” is being
displayed.
Press [OK] again to stop the
display.
It is recommended to have a
signal strength of “LEVEL 3”.
Change the position or angle of
your wireless network router or
this system if the indication is
“LEVEL 2” or “LEVEL 1” and see if
the connection improves.
If “LEVEL 0” is displayed, this
system cannot establish a link with
the wireless network router.
“WIRED LAN” is displayed when
connected with a LAN cable.
NET
STANDBY
This system can turn on
automatically from standby
mode when this system is
selected as the AllPlay/DLNA
speakers.
This function normally switches to
“ON” while this system is
connected to a network.
To turn off this function, select
“OFF” and then select a source
other than “NETWORK” before
switching this system to standby
mode.
ON
OFF
If this function is set to “ON” the
standby power consumption will
increase.
When the system is turned on by
this feature, the beginning part of
the music may not be played back.
Depending on the app, the
conditions for activating this
function may differ.
The system may not turn on even
when selected as the output
speakers. In that case, start
playback.
WIRELESS
LAN
The wireless LAN function
can be enabled or disabled.
ON
OFF
F/W VERSION
You can check the firmware
version.
The version of the installed
firmware is displayed when you
press [OK] while “F/W VERSION”
is being displayed.
Press [OK] again to stop the
display.
F/W UPDATE
You can update the firmware
of this system.
For details, refer to “Firmware
update” (> 32)
SC-ALL70T-SQT0935.book 31 ページ 2015年4月28日 火曜日 午前10時5分
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCALL70TGN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCALL70TGN in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCALL70TGN

Panasonic SCALL70TGN Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info