612774
29
Zoom out
Zoom in
Previous page
1/40
Next page
Reference
SQT0936
29
When the HDMI connections are changed,
after a power failure or after the AC mains
lead has been removed, VIERA Link
operations may not function properly.
jTurn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
jTurn off the VIERA Link settings of the TV
and turn it on again. For details refer to the
operating instructions for the TV.
jWhile the main unit and the TV are
connected with the HDMI cable, turn on the
TV and then remove the main unit’s AC
mains lead and reconnect it again.
The first few seconds of audio cannot be
heard when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output
setting on the connected device from
“Bitstream” to “PCM”.
When operating an HDMI compatible device
of a different brand, the main unit reacts in
an unwanted manner.
HDAVI Control commands may use a different
signal depending on the brand of the device. In
this case, turn VIERA Link off. (> 23)
When the main unit is turned on or off, audio
and video are temporarily disabled.
When the main unit is turned on or off it is
normal for the audio and video to be temporarily
disabled. This is not a malfunction. This can
occur when the device it is connected to, via
HDMI, does not support Panasonic’s VIERA
Link feature (HDAVI Control 3 or later).
The images from this system do not appear
on the TV.
When outputting in 60p (4K), images may be
distorted depending on the HDMI cable. Use
High Speed HDMI cables which support
18 Gbps bandwidth.
Pairing cannot be done.
Check the Bluetooth
®
device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or
the registration has been replaced. Try pairing
the device again. (> 19)
This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
For some Bluetooth
®
devices, you have to set
the audio output to “SC-ALL30T” manually.
Read the operating instructions for the device
for details.
Connection is interrupted.
Sound is interrupted/sound skips/there is a
lot of noise.
Remove any obstacle between the main unit
and the device.
Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth
®
device closer to the main unit and
distance it from the other devices.
Select “MODE 1” for stable communication.
(> 23)
If the above does not fix the problem, you may
be able to fix the problem by reconnecting this
unit and the Bluetooth
®
device.(> 20)
The One-Touch Connection (NFC feature) is
not working.
Make sure the main unit and the NFC feature
of the device are turned on. (> 20)
Change the touch location of the Bluetooth
®
device or main unit and then touch the NFC
touch area again.
Bluetooth
®
SC-ALL30T-SQT0936.book 29 ページ 2015年4月28日 火曜日 午前10時0分
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCALL30TEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCALL30TEG in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCALL30TEG

Panasonic SCALL30TEG Quick start guide - English - 12 pages

Panasonic SCALL30TEG User Manual - German - 344 pages

Panasonic SCALL30TEG Quick start guide - German - 12 pages

Panasonic SCALL30TEG User Manual - Dutch - 344 pages

Panasonic SCALL30TEG Quick start guide - Dutch - 12 pages

Panasonic SCALL30TEG User Manual - Danish - 344 pages

Panasonic SCALL30TEG Quick start guide - Danish - 12 pages

Panasonic SCALL30TEG User Manual - French - 344 pages

Panasonic SCALL30TEG Quick start guide - French - 12 pages

Panasonic SCALL30TEG User Manual - Italian - 344 pages

Panasonic SCALL30TEG Quick start guide - Italian - 12 pages

Panasonic SCALL30TEG User Manual - Polish - 344 pages

Panasonic SCALL30TEG Quick start guide - Polish - 12 pages

Panasonic SCALL30TEG User Manual - Swedish - 344 pages

Panasonic SCALL30TEG Quick start guide - Swedish - 12 pages

Panasonic SCALL30TEG User Manual - Spanish - 344 pages

Panasonic SCALL30TEG Quick start guide - Spanish - 12 pages

Panasonic SCALL30TEG User Manual - Finnish - 344 pages

Panasonic SCALL30TEG Quick start guide - Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info