612685
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
Radio operations
RQT5258
1
2
3
4
1
2
3
4
Up to 12 stations can be set in each band with the automatic or
manual memory presetting.
If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies from the system or remote control
unit.
You can preset just those stations you like. (See “Presetting only
your favorite stations” below.)
1
Press [TUNER, BAND] to select band.
The system will come on automatically.
Every time you press the button: FM AM
2
Press [
LL
LL
L, TUNE MODE] to select “MANUAL”.
Every time you press the button: MANUAL PRESET.
3
Press [TUNE/TIME ADJ (3) or (4)] until the display
shows the frequency from which you want to begin
automatic memory presetting.
Tips on tuning in radio stations
1 Hold down either arrow button until the frequency numbers
start scrolling.
2 When near to the frequency you are looking for, press the
button repeatedly until the station is tuned in.
4
Press and hold [
))
))
)/
ff
ff
f, MEMORY] until the
frequency begins to change.
This will start presetting automatically. When finished, the radio
will tune in the last station memorized.
If auto presetting is not possible because radio signals are weak
or for some other reasons, do the following.
Presetting only your favorite stations
Preset the stations one at a time.
1. Perform step 1 above. Then, press [)/f, MEMORY]
(“MEMO” flashes) and select a station with [TUNE/TIME ADJ
(
11
11
1) or (
22
22
2)].
2. While “MEMO” is flashing, press [)/f, MEMORY] again and
select a preset channel with [TUNE/TIME ADJ (
11
11
1) or (
22
22
2)].
3. Press [)/f, MEMORY] to preset the station.
Memory retention
Your preset is retained in memory for about 2 weeks while the system
is unplugged.
FM allocation setting
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER, BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency.
If you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
Preset channel
Presetting radio broadcasts
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCAK24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCAK24 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info