612680
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
Timer operations
RQT6085
1
2
3
4
5
2
3
5
4
1
2
3
FOR PLAY TIMER
FOR RECORD TIMER
FOR PLAY TIMER
FOR RECORD TIMER
FOR PLAY TIMER
FOR RECORD TIMER
PLAY
REC
FOR PLAY TIMER
FOR RECORD TIMER
CL
OCK/
TIMER
CL
OCK/
TIMER
CL
OCK/
TIMER
Previous display
Using the timer
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations
Turn the unit on and set the clock (A page 11).
For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
For the record timer, check the cassettes erasure prevention tabs
(A page 21: A), insert the tape in deck 2 (A page 21) and tune to
the radio station (A page 12) or select the aux source (A page
27).
1 Press [CLOCK/TIMER] to select the
timer function.
Every time you press the button:
CLOCK RECPLAY
rPLAY : to set the play timer
rREC : to set the record timer
2 ON time setting
1 (Within 8 seconds or so)
Press [g/REW/4] or [3/FF/f] to
select the starting time.
2 Press [CLOCK/TIMER].
3 OFF time setting
1 Press [g/REW/4] or [3/FF/f] to
select the finishing time.
2 Press [CLOCK/TIMER].
The start and finish times are now set.
4 Press [rPLAY/REC] to display the timer
indicator.
Every time you press the button:
RECPLAY
(OFF)
rPLAY : to turn the play timer on
rREC : to turn the record timer on
(The indicator doesnt appear if the start and finish times or the
clock hasnt been set.)
5 Press [f] to turn the unit off.
The unit must be off for the timers to operate.
For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you pre-set.
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [rPLAY/REC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
To change the play/record times
Do steps 1, 2, 3 and 5.
To change the source or volume
1. Press [rPLAY/REC] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
Remote control only
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCAK200P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCAK200P in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info