612657
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
RQT6351
Cassette deck operations
You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit
will not be able to do full justice to the characteristics of these tapes.
1 Press [TAPE :].
The unit comes on.
If a cassette was loaded, play starts automatically (One touch play).
2 Press [c DECK 1 OPEN] or [c DECK 2 OPEN] and
insert the cassette.
Insert with the side to be played facing towards you and the
exposed tape facing down.
Close the holder by hand.
3 Press [TAPE :] to start playback.
To stop tape playback
Press [L/–DEMO].
To fast-forward or rewind
Press [g/REW/3] (rewind) or [4/FF/f] (fast-forward).
To select between loaded decks
Press [DECK 1/2] (remote control: [PLAY MODE]).
Notes
Tape playback is momentarily interrupted if you open the other deck.
Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
Tape slack can get caught up in the mechanism and should be
taken up before the tape is played.
Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
Using the built-in sound quality
You can choose one of the four types of sound quality.
HEAVY : Adds punch to rock
SOFT : For background music
CLEAR : Clarifies higher sounds
VOCAL : Adds gloss to vocals
Press [PRESET EQ] to select a setting.
Every time you press the button:
Note
You cannot use PRESET EQ and SUPER SOUND EQ together.
Cassettes
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Preparation:
Wind up the leader tape so recording can begin immediately.
1 Press [c DECK 2 OPEN] and insert the cassette to
be recorded.
Insert with the side to be recorded facing towards you and the
exposed tape facing down.
2 Select the source to be recorded.
Radio recording:
Tune in the station. (z page 7)
CD recording:
1. Insert the CD(s) to be recorded.
Press [CD :/ J] and then [L/–DEMO].
2. Prepare the desired CD recording mode.
To record programmed tracks (z "Program play" on page 9:
steps 1–3).
To record specific CDs/Tracks (z "To listen to specific CDs
and tracks (CD Play Mode function)" on page 9: steps 1–3)
Ensure CD is stopped.
Tape-to-tape recording:
1. Press [TAPE :] and then [L/–DEMO].
2. Press [c DECK 1 OPEN] and insert the cassette you want to
record.
3 Press [a REC] to start recording.
To stop recording
Press [L/–DEMO].
HEAVY SOFT CLEAR
EQ-OFF
VOCAL
(cancelled)
1
3
2
DECK 1/2
DEMO
PLAY
MODE
L/DEMO
3
1
PLAY MODE
You can enhance the bass and treble effect of the sound.
Press [SUPER SOUND EQ].
Remote control: Press [S.SOUND EQ].
Press the button again to cancel.
The button light goes out.
Enhancing the sound quality
SUPER
SOUND EQ
S.SOUND EQ
PRESET EQ
PRESET EQ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCAK100PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCAK100PC in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info