735114
17
Zoom out
Zoom in
Previous page
1/116
Next page
Confidential
Until:
02 Aug 2019
17
TQBJ2193
17
Unit displays
“--:--”
You connected the AC mains lead for the first time or there
was a power failure recently. Set the clock.
Track play time is more than 99 minutes.
“ADJUST CLOCK”
The clock is not set. Adjust the clock.
“ADJUST TIMER”
The play timer is not set. Adjust the play timer.
“AUDIO UNSUPPORTED”
The signal format or frequency is not supported.
This system does not support bitstream signals. Change the
digital audio output setting on the external equipment to
PCM.
This system supports sampling frequencies of 32 kHz,
44.1 kHz, 48 kHz, up to 96 kHz. Select only the supported
sampling frequencies on the connected equipment.
Try connecting the external equipment by using the auxiliary
input.
“AUTO OFF”
The system has not been used for 20 minutes and will
switch off within a minute. To cancel, press any button.
“DEVICE CONNECTED FULL”
You have connected 3 Bluetooth
®
devices. To connect
another device, disconnect one of the connected devices
and try again.
“ERROR”
An incorrect operation was done. Read the instructions and
try again.
“F” / “F” (“” represents a number.)
The protection circuit has been activated and the system
may be switched off automatically.
Disconnect the AC mains lead and wait for a few seconds
before connecting it again. If the problem persists,
disconnect the AC mains lead and consult your dealer.
“NO DISC”
You have not put in a disc.
“NO PLAY”
“UNSUPPORT”
There is no album or track in the USB device.
Examine the content. You can only play supported format.
The files in the USB device can be corrupted. Format the
USB device and try again.
The system may have a problem. Switch off the system and
then switch on again.
“NOT SUPPORT MULTI CONNECT”
The Bluetooth
®
connection cannot be established.
Disconnect the existing connected devices and try again.
“NOT SUPPORTED”
To use Karaoke effect in D-IN source, change the digital
audio output setting on the external equipment to PCM.
“PLAYERROR”
An unsupported MP3 file has been played. The system will
skip that track and play the next one.
“REMOTE 1”
“REMOTE 2”
The remote control and the unit are using different codes.
Change the code of the remote control.
When “REMOTE 1” is shown, press and hold [OK] and
[ ] on the remote control for a minimum of 4 seconds.
When “REMOTE 2” is shown, press and hold [OK] and [<]
for a minimum of 4 seconds.
“USB A NO DEVICE”
“USB B NO DEVICE”
The USB device is not connected. Examine the connection.
“USB OVER CURRENT ERROR”
The USB device is drawing too much power. Disconnect the
USB device, switch off the system and then switch on again.
Check the connection, it may be caused by a faulty USB
cable.
“VBR”
The system cannot show the remaining play time for variable
bit rate (VBR) tracks.
TMAX40.50E_TQBJ2193_En.Sw.Da.Fi.Po.Cz.book Page 17 Tuesday, July 16, 2019 10:45 AM
offset printing
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-TMAX40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-TMAX40 in the language / languages: English, Danish, Polish, Swedish, Finnish as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-TMAX40

Panasonic SC-TMAX40 User Manual - German, Dutch, French, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info