734652
11
Zoom out
Zoom in
Previous page
1/136
Next page
Operations
11
TQBS0132
Bluetooth
®
connection
By using the Bluetooth
®
connection, you can listen
to the sound from the Bluetooth
®
audio device
from this system wirelessly.
Refer to the operating instructions of the Bluetooth
®
device
for further instruction on how to connect a Bluetooth
®
device.
Preparation
Turn on the Bluetooth
®
feature of the device and
place the device near this system.
1 Press [ ] to select “ ”.
If the “ ” indicator flashes quickly, go to step 3.
2 Press and hold [ ] until the “ indicator
flashes quickly.
If the “ ” indicator flashes slowly, repeat step 2.
3 Select “SC-SB1” from the Bluetooth
®
device’s Bluetooth
®
menu.
If prompted for the passkey on the Bluetooth
®
device,
enter “0000”.
Once the Bluetooth
®
device is connected, the “
indicator stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
1 Press [ ] to select “ ”.
If the “ ” indicator lights, a Bluetooth
®
device is
already connected with this system. Disconnect it.
(> below)
2 Select “SC-SB1” from the Bluetooth
®
device’s Bluetooth
®
menu.
Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes.
This system can only be connected to one device at a time.
Advanced operations
This system is automatically turned off if there is no audio
input and when you do not use it for approx. 19 min and
30 sec.
1 While pressing
and holding
[i SUBWOOFER]
on the remote control, press and hold
[VOL s] on this system for more than
4 sec.
The current mode will be indicated by the
corresponding LED indicator.
2 While the current mode is indicated (about
20 sec), press [i SUBWOOFER] again.
The setting changes each time [i SUBWOOFER] is
pressed.
The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
The setting is maintained until it is changed again.
Default setting of this function is “On”.
This function allows you to connect a paired Bluetooth
®
device when this system is in standby mode.
1 While pressing
and holding
[SUBWOOFER j]
on the remote control, press and hold
[VOL s] on this system for more than
4 sec.
The current mode will be indicated by the
corresponding LED indicator.
2 While the current mode is indicated (about
20 sec), press [SUBWOOFER j] again.
The setting changes each time [SUB WOOFER j] is
pressed.
The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
The setting is maintained until it is changed again.
Default setting of this function is “On”.
Bluetooth
®
pairing
Connecting a paired Bluetooth
®
device
Auto Power Down
Bluetooth
®
Standby
“On” “Off”
“On” “Off”
(11)
SC-SB1_EG_TQBS0132.book 11 ページ 2017年4月21日 金曜日 午後3時32分
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-SB1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-SB1 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info