370687
60
Zoom out
Zoom in
Previous page
1/68
Next page
60
RQT8672
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies
indicated in the chart do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
Power Page
TV screen and video
Displays
Regular disc rotating sounds.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Interruptions in reception due to periodic satellite broadcasting
breaks.
Operations do not work due to a poor-quality disc. (Try again
using a Panasonic disc.)
The unit freezes due to one of its safety devices being
activated. (Press and hold [Í/I] on this unit for 10 seconds.)
No power.
The unit does not turn on
pressing [Í].
Insert the AC mains lead securely into a known active AC mains socket.
Linked timer recordings with external equipment is in recording standby (“EXT-L”
on the unit’s display blinks when [Í] is pressed). Press [EXT LINK] to cancel the
recording standby.
16
29
The unit switches to the
standby mode.
One of the unit’s safety devices is activated. Press [Í/I] on this unit to turn the
unit on.
Television reception worsens
after connecting the unit.
This can occur because the signals are being divided between the unit and other
equipment. It can be solved by using a signal booster, available from audio-visual
suppliers. If it is not solved by using a signal booster, consult the dealer.
Status messages do not
appear.
Select “Automatic” in “On-Screen Messages” in the Setup menu. 51
The grey background does
not appear.
Select “On” in “Grey Background” in the Setup menu. 51
Picture does not appear
during timer recording.
Timer recordings work regardless whether the unit is on or off. To confirm the
timer recording is going to work properly, turn the unit on.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the television to change the aspect. If your television does not have that
function, set “Progressive” in the Picture menu to “Off”.
Check the settings for “TV Aspect” in the Setup menu.
36
51
There is a lot of after-image
when playing video.
Set “Playback NR” in the Picture menu to “Off”. 36
When playing DVD-Video
using progressive output,
one part of the picture
momentarily appears to be
doubled up.
Set “Progressive” in the Picture menu to “Off”. This problem is caused by the
editing method or material used on DVD-Video, but should be corrected if you use
interlace output.
36
There is no apparent change in
picture quality when adjusted
with the Picture menu in the
on-screen menus.
The effect is less perceivable with some types of video.
The images from this unit do
not appear on the television.
Make sure that the television is connected to the AV1 terminal, VIDEO OUT terminal,
S VIDEO OUT terminal or COMPONENT VIDEO OUT terminals on this unit
.
Make sure that the television’s input setting (e.g. AV 1) is correct.
12–15
Picture is distorted. Progressive output is set to on but the connected television is not progressive
compatible. Press and hold [] and [1a1.3] on this unit at the same time for
about 5 seconds. The setting will change to interlace.
The unit’s “TV System” setting differs from the TV system used by the disc now
playing. While stopped, press and hold [
] and [
<
OPEN/CLOSE] on
this
unit for 5
or more seconds. The system switches from PAL to NTSC or vice versa.
54
The display is dim. Change “FL Display” in the Setup menu. 51
“0:00” is flashing on the
unit’s display.
Set the clock. 55
The clock is not correct. Under adverse reception conditions, etc., the automatic time correction function
may not work. In this case, “Automatic” is automatically turned to “Off”. If re-
setting the Auto Clock Setting does not work, set the time manually.
55
The time recorded on the disc
and the available time shown
do not add up.
The play time shown for MP3
does not agree with the
actual time.
Times shown may disagree with actual times.
Even if you delete recorded content from the DVD-R, DVD-R DL, +R or +R DL,
there is no increase in disc space.
Available recording space on DVD-RW (DVD-Video format) or +RW increases
only when the last recorded title is deleted. It does not increase if other titles are
deleted.
More disc space than the actual recording time is used after recording or editing
DVD-R, DVD-R DL, +R or +R DL 200 times or more. (For the second layer on
DVD-R DL and +R DL, this happens after about 60 times.)
While searching, the elapsed time may not display correctly.
“U88” is displayed and the
disc cannot be ejected.
The unit is carrying out the recovery process. Do the following to eject the disc.
1Press [Í/I] on this unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on this unit for about
10 seconds. The unit is forcibly switched to standby.
2 While the unit is off, press and hold [] and [CH W] on this unit at the same time
for about 5 seconds. Remove the disc.
RT70-30.book Page 60 Thursday, April 13, 2006 1:45 PM
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc rt 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc rt 30 in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc rt 30

Panasonic sc rt 30 User Manual - English - 8 pages

Panasonic sc rt 30 User Manual - German - 12 pages

Panasonic sc rt 30 User Manual - German - 156 pages

Panasonic sc rt 30 User Manual - Dutch - 12 pages

Panasonic sc rt 30 User Manual - Dutch - 208 pages

Panasonic sc rt 30 User Manual - Danish - 12 pages

Panasonic sc rt 30 User Manual - Danish - 208 pages

Panasonic sc rt 30 User Manual - French, Italian - 156 pages

Panasonic sc rt 30 User Manual - Polish - 12 pages

Panasonic sc rt 30 User Manual - Polish - 104 pages

Panasonic sc rt 30 User Manual - Swedish - 12 pages

Panasonic sc rt 30 User Manual - Swedish - 208 pages

Panasonic sc rt 30 User Manual - Spanish - 12 pages

Panasonic sc rt 30 User Manual - Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info