618633
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
RQTX1198
Getting Started
Language
Select the language used on menu screen.
TV aspect
Select the aspect to suit your TV.
Speaker layout
Select “Surround layout (Recommended)” mode or
“Front layout (Alternative)” mode according to your
speaker layout (B 6, Installation).
Speaker check
Listen to speaker output to confirm speaker
connections.
Speaker output
Make surround sound setting for speaker output.
TV audio
Select the audio input connection from your TV.
For AUX connection (B 8): Select “AUX”.
For HDMI connection (B 7): Select “ARC”.
For SCART (AV) connection (B 7): Select “AV”.
This will be the TV audio setting for VIERA Link
“HDAVI Control”. (B 16)
[Note]
If this unit is connected to a “HDAVI Control 3 or later”
compatible TV via HDMI cable, the menu language
and TV aspect information will be retrieved via VIERA
Link.
If this unit is connected to a “HDAVI Control 2”
compatible TV via HDMI cable, the menu language
information will be retrieved via VIERA Link.
Settings in the EASY SETUP can also be changed in
the player settings (e.g. language, TV aspect, TV
audio (B 17)).
Up to 30 stations can be set.
“SET OK” is displayed when the stations are set, and
the radio tunes to the last preset station.
“ERROR” is displayed when automatic presetting is
unsuccessful. Preset the stations manually (B right).
The FM setting is also shown on the TV display.
Press and hold [PLAY MODE] to display “MONO”.
To cancel the mode, press and hold the button again
until “AUTO ST” is displayed.
The mode is also cancelled when you change the
frequency.
Up to 30 stations can be set.
A station previously stored is overwritten when another
station is stored in the same channel preset.
EASY SETUP settings
Listening to the radio
Presetting stations automatically
1
Press [RADIO] to select “FM”.
2
Press [MENU].
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
§
§ To change the frequency, refer to “Manual tuning”
(B right).
3
Press and hold [OK].
Release the button when “FM AUTO” is displayed.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
Listening/confirming the preset channels
1
Press [RADIO] to select “FM”.
2
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
Alternatively, press [X, W].
If noise is excessive
Manual tuning
1
Press [RADIO] to select “FM”.
2
Press [SEARCH6, SEARCH5] to select the
frequency.
To start automatic tuning, press and hold
[SEARCH6, SEARCH5] until the frequency
starts scrolling. Tuning stops when a station is
found.
Presetting stations manually
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
Alternatively, press [X, W], and then press [OK].
QUICK START GUIDEQUICK START GUIDEQUICK START GUIDE
steps 2–5
SC-PT90EB-RQTX1198-B_eng.book Page 9 Wednesday, May 5, 2010 11:58 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-PT90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-PT90 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-PT90

Panasonic SC-PT90 User Manual - German - 68 pages

Panasonic SC-PT90 User Manual - Dutch, Danish - 92 pages

Panasonic SC-PT90 User Manual - French, Italian - 68 pages

Panasonic SC-PT90 User Manual - Swedish, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info