160617
34
Zoom out
Zoom in
Previous page
1/40
Next page
34
RQTX0227
Getting StartedPlaying DiscsOther OperationsReference
Troubleshooting guide
Before requesting service, make the following checks. If you
are in doubt about some of the check points, or if the
solutions indicated in the following guide do not solve the
problem, consult your dealer for instructions.
No power.
Insert the AC mains lead securely. (
B
10)
The unit is automatically switched to standby mode.
The Sleep timer was working and had reached the set time
limit. (
B
38)
The display is dark.
Select “BRIGHT” in “FL DIMMER” in the OTHERS menu.
(
B
28)
“NO PLAY”
You inserted a disc the unit cannot play; insert one it
can. (B 32)
You inserted a blank disc.
You inserted a disc that has not been finalized.
“NO DISC”
You have not inserted a disc; insert one.
You have not inserted the disc correctly; insert it
correctly. (B 16)
OVER CURRENT ERROR”
The USB device is drawing too much power. Switch to DVD/
CD mode, remove the USB and turn the unit off.
“IPOD OVER CURRENT ERROR”
The iPod is drawing too much power. Remove the iPod, and
turn the unit off and on again.
“F61”
Check and correct the speaker cable connections. If this
does not fix the problem, consult the dealer. (
B
8)
“F76”
There is a power supply problem. Consult the dealer.
“DVD U11”
Disc may be dirty. Wipe it clean. (
B
33)
“ERROR”
Incorrect operation performed. Read the instructions and try
again.
“DVD H∑∑
“DVD F∑∑∑
stands for a number.
Trouble may have occurred. The numbers following “H”
and “F” depend on the status of the unit. Turn the unit
off and then back on. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service
number and contact a qualified service person.
“U70
stands for a number. (The actual number following “U70”
will depend on the state of this unit.)
The HDMI connection acts unusually.
The connected equipment is not HDMI-compatible.
Please use HDMI cables that have the HDMI logo (as
shown on the cover).
The HDMI cable is too long.
The HDMI cable is damaged.
“REMOTE 1” or “REMOTE 2”
Match the modes on this unit and remote control. Depending
on the number being displayed (“1” or “2”), press and hold
[OK] and the corresponding numbered button ([1] or [2]) for
at least 2 seconds. (
B
38)
“LOADING”
The iPod is not ready. Wait for this display to disappear.
Disconnect the iPod, and then reconnect it firmly. (
B
24)
“NO MIC”
The Auto speaker setup microphone is not inserted. Check
whether the Auto speaker setup microphone is plugged in
properly into the SETUP MIC jack.
“NOISY”
Excessive ambient noise in the room. Perform the setup
again and keep quiet during the Auto speaker setup.
No response when any buttons are pressed.
This unit cannot play discs other than the ones listed in
these operating instructions. (B 32)
The unit may not be operating properly due to lightning,
static electricity or some other external factor. Turn the
unit off and then back on. Alternatively, turn the unit off,
disconnect the AC mains lead, and then reconnect it.
Condensation has formed. Wait 1 to 2 hours for it to
evaporate.
No response when remote control buttons are pressed.
Check that the batteries are installed correctly. (B 10)
The batteries are depleted. Replace them with new
ones. (B 10)
Aim the remote control at the remote control signal
sensor and operate. (B 39)
Other products respond to the remote control.
Change the remote control operating mode. (
B
38)
No picture or sound.
Check the video or speaker connection. (B 8, 9)
Check the power or input setting of the connected
equipment and this unit.
Check that the disc has something recorded on it.
You have forgotten your ratings password.
Reset all the settings to Factory Preset.
While stopped and “DVD/CD” is the source, press and hold
[
] (Stop) on this unit and [
S
10] on the remote control until
“INITIALIZED” disappears from the TV. Turn the unit off
and on again.
All settings will return to the default values.
(This does not work during program and random modes, or
when setup menu or START menu is displayed.)
Some characters are not displayed correctly.
Characters other than English alphabet and Arabic
numerals may not be displayed correctly.
The VIERA Link “HDAVI Control” function does not
respond.
Depending on the condition of this unit or the connected
equipment, it may be necessary to repeat the same
operation so that the function can work correctly. (
B
22)
The setting you made in “TV ASPECT” (
B
26, VIDEO
menu) or “LANGUAGE” (
B
27, DISPLAY menu) does
not work.
The settings for “TV ASPECT”
§
1
and “LANGUAGE”
§
2
will
automatically follow to the information from the TV. (
B
11,
Smart setup settings)
Power
Unit displays
General operation
RQTX0227-B_eng.book Page 34 Wednesday, December 17, 2008 11:28 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc pt870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc pt870 in the language / languages: English as an attachment in your email.

The manual is 11,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc pt870

Panasonic sc pt870 User Manual - English - 36 pages

Panasonic sc pt870 User Manual - German, French, Italian - 104 pages

Panasonic sc pt870 User Manual - Polish - 104 pages

Panasonic sc pt870 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info