61829
29
Zoom out
Zoom in
Previous page
1/116
Next page
29
Using sound effects
ENGLISH
RQTX0098
You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.
To check the current setting, press [SUBWOOFER LEVEL].
The setting you make is retained, and recalled every time you play the
same type of source.
Main unit only
You can enhance the subwoofer effect with strong bass.
You can adjust the surround sound levels.
Preparation
Press [i ,` VOL] to adjust the volume to normal listening level.
Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
(22).
To adjust speaker level during play
(Effective when playing 5.1-channel sound or when Dolby Pro
Logic II is on.)
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L #C #R #RS #LS #SW
^----------------------------------------------}
You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and “ÎPLII” is not lit.
2 Press [3] (increase) or [4] (decrease) to adjust the speaker
level for each speaker.
C, RS, LS, SW: `6dB to i6dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected,
press [2, 1].
(For [PT860] only)
The speaker level settings can be optimized to accommodate your room’s
listening conditions so that you can enjoy the ideal surround sound
experience. Using the supplied Auto speaker setup microphone, the main
unit adjusts the balance of the front speakers, and the volume level of the
center and surround speakers automatically.
Preparation
Turn off the television before starting the Auto speaker setup.
Make sure that “DVD/CD” is selected as the source and there are no
disc in the tray.
Ensure that headphones are disconnected.
For speakers with wireless system, ensure that the speakers are linked
to the main unit.
[Note]
Audio settings will be restored to default if the Auto speaker setup is
canceled.
Adjusting the subwoofer level
SUB W 1#SUB W 2#SUB W 3
^---------------------------------------------------}
Using Subwoofer Boost
BST ON,------.BST OFF
The SW BOOST indicator lights when
Subwoofer Boost is turned on.
Adjusting the speaker level
1
Enter test tone mode.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`
6dB to
i
6dB
To exit the screen, press [SETUP].
SUBWOOFER
-
CH SELECT
LEVEL
SW
BOOST
SW BOOST indicator
OK
SET
RETURN
AUDIO - SPEAKER SETTINGS - TEST TONE
SPEAKERS
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
EXIT : SETUP
e.g.
OK
Adjusting the Speaker output level
automatically: Auto speaker setup
Keep as quiet as possible during the Auto speaker setup. Loud voices,
air-conditioning noise, or excessive wind may lead to incorrect settings.
The speakers output loud test signals during setup.
1
While stopped
Connect the Auto speaker setup
microphone.
Place the Auto speaker setup microphone at
actual seating position. (At ear level when
seated.)
2
(press and hold)
Start the setup
The test signal is output from each speaker.
“COMPLETE” is displayed when Auto
speaker setup is completed.
To cancel the setup
Press and hold [—AUTO SP] again.
(“CANCEL” will be displayed when Auto
speaker setup is canceled.)
SETUP MIC
SETUP
-
AUTO SP
29
SC-PT560_860E-RQTX0098-R_eng.book Page 29 Tuesday, December 4, 2007 9:02 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-PT860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-PT860 in the language / languages: English, Polish as an attachment in your email.

The manual is 20,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-PT860

Panasonic SC-PT860 User Manual - English - 44 pages

Panasonic SC-PT860 User Manual - German - 116 pages

Panasonic SC-PT860 User Manual - Dutch, Danish - 116 pages

Panasonic SC-PT860 User Manual - French, Italian - 116 pages

Panasonic SC-PT860 User Manual - Swedish - 116 pages

Panasonic SC-PT860 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info