371007
37
Zoom out
Zoom in
Previous page
1/48
Next page
OTHER OPERATIONS
ENGLISH
37
RQT8043
RQTX0067
Operating the television
You can use the remote control to operate a
Panasonic television.
Aim the remote control at the television.
To switch the television on or off
To switch the television’s video input mode
Adjust the volume
To play audio from your television through your
home theater system
Preparation
Connect your equipment referring to “Connect to the
various television terminals” (\ page 9).
Press [EXT-IN] to select “AV” as the source. Then
reduce the volume on the television to its minimum,
and control the volume on this main unit.
Note
• The remote control may not work properly with
some models.
• You can enjoy 5.1-channel surround sound when
you turn on Super Surround (MOVIE, MUSIC)
(\ page 31).
Changing the main unit and remote control
The remote control and main unit are factory-set to
“REMOTE 1” mode.
If your remote control affects other equipment during
operation, you can switch to operate in “REMOTE 2”
mode.
To switch to “REMOTE 2” mode
1 While pressing and holding [¡/ ¢] on the main
unit
“REMOTE 2” appears on the main unit display.
2 To operate in “REMOTE 2” mode
+
(Press and hold for 2 seconds)
To return to “REMOTE 1” mode
Perform steps 1 and 2 but use [1] instead of [2] for
both steps. (REMOTE 1” appears on the main unit
during step 1.)
The remote control cannot work with the main
unit if their modes are different.
“REMOTE 1” or “REMOTE 2” appears on the main
unit display when you operate the remote control.
If “REMOTE 1” appears (The main unit is in
“REMOTE 1” mode.)
Press and hold [ENTER] and [1] on the remote
control for at least 2 seconds.
If “REMOTE 2” appears (The main unit is in
“REMOTE 2” mode.)
Press and hold [ENTER] and [2] on the remote
control for at least 2 seconds.
Note
You can still operate a television using the remote
control (\ see above) even after switching the mode.
VIERA Link Control only with TV’s remote control
(for “HDAVI Control 2”)
You can control the disc menus of the home theater
system with the TVs remote control when using the
“DVD/CD” source. When operating the TVs remote
control, refer to the below illustration for operation
buttons.
1. Select the theater operation menu by
using the television menu settings.
(For details, refer to the operating
instructions of your television.)
The home theater system will
automatically switch to
“DVD/CD” if it is in “AUX”
mode.
ENTER/
PLAY
RETURN
2. Select the desired item.
“TOP MENU” : Shows a disc
top menu
(\ page 17, 19)
or program list
(\ page 20).
“MENU” : Shows a
disc menu
(\ page 17, 19)
or play list
(\ page 20).
“Control Panel” : The basic
operations
for discs are
available.
VIERA Link
TOP MENU
MENU
Control Panel
RETURN
Note
• Depending on the menu, some button operations
cannot be performed from the TVs remote control.
• “Control Panel” can be selected directly by using a
button on the TV’s remote control (e.g. [OPTION]).
RQTX0067-B_new18.indd 37RQTX0067-B_new18.indd 37 3/19/07 5:48:38 PM3/19/07 5:48:38 PM
37


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-pt450

Reset search

  • Why has the FM Radio stopped working on my Panasonic SC-PT450
    It always had trouble getting a reception but went. Submitted on 26-4-2022 at 09:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc pt450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc pt450 in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc pt450

Panasonic sc pt450 User Manual - English - 12 pages

Panasonic sc pt450 User Manual - English - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info