Manual Panasonic SC-PMX9 (page 73 of 76) (English, Polish, Finnish)

563930

Zoom out

Zoom in

1/76

VQT4Z21

until

2013/5/8

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this

manual for future use.

Dziękujemy za zakupienie tego produktu.

Przed przystąpieniem do eksploatacji opisywanego produktu należy dokładnie

przeczytać niniejsze zalecenia i zachować instrukcję obsługi do wglądu.

Děkujeme za zakoupení tohoto výrobku.

Před použitím tohoto produktu si pečlivě přečtěte tyto pokyny a celý návod si uložte

pro pozdější použití.

Kiitos, että hankit tämän tuotteen.

Lue nämä ohjeet huolellisesti ennen tämän tuotteen käyttämistä ja säilytä tämä

käsikirja tulevaa tarvetta varten.

Operating Instructions

Instrukcja obsługi

Návod k obsluze

Käyttöohjeet

CD Stereo System

Zestaw stereo z CD

Stereosystém s CD

CD-stereojärjestelmä

Model No. SC-PMX9

SC-PMX9EG-VQT4Z21.book 1 ページ２０１３年３月２２日　金曜日　午後４時５４分

VQT4Z21

ENGLISH

Do the procedures with the remote control. You can

also use the buttons on the main unit if they are the

same.

Your system and the illustrations can look differently.

These operating instructions are applicable to the

following system.

Safety precautions

Unit

• To reduce the risk of fire, electric shock or product damage,

- Do not expose this unit to rain, moisture, dripping or

splashing.

- Do not place objects filled with liquids, such as vases, on

this unit.

- Use only the recommended accessories.

- Do not remove covers.

- Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

Unit

• To reduce the risk of fire, electric shock or product damage,

- Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

- Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

- Do not place sources of naked flames, such as lighted

candles, on this unit.

• This unit is intended for use in moderate climates.

• The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged

from the socket outlet immediately.

• This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

• This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified

herein may result in hazardous radiation exposure.

Battery

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

• Remove the battery if you do not use the remote control for

a long period of time. Keep in a cool, dark area.

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

Android, Google Play and Chrome are trademarks of Google Inc.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,

service marks, or certification marks of the Digital Living Network

Alliance.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi

Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or

registered marks of the Wi-Fi Alliance.

MPEG Layer-3 audio coding technology licensed from Fraunhofer

IIS and Thomson.

The Bluetooth

word mark and logos are owned by the Bluetooth

SIG, Inc. and any use of such marks by Panasonic Corporation is

under license.

Other trademarks and trade names are those of their respective

owners.

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Table of contents

Safety precautions...........................................2

Supplied accessories ......................................3

Maintenance .....................................................3

Preparing the remote control.......................... 3

Making the connections..................................3

Placement of speakers.................................... 4

Overview of controls ....................................... 4

Inserting media ................................................ 5

Media information............................................ 5

Network settings.............................................. 6

Using AirPlay with this system’s speakers... 9

Playing back music files on the DLNA server.....10

Bluetooth

operations ................................... 11

About Bluetooth

........................................... 11

Media Playback operations...........................12

Radio............................................................... 13

Clock and timers............................................ 13

Sound effects .................................................14

Using the auxiliary input ............................... 14

Others .............................................................14

Troubleshooting.............................................16

Specifications ................................................ 18

“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean

that an electronic accessory has been designed to connect

specifically to iPod, iPhone, or iPad, respectively, and has been

certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone, or

iPad may affect wireless performance.

AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod

nano, and iPod touch are trademarks of Apple Inc., registered in

the U.S. and other countries.

App Store is a service mark of Apple Inc.

System SC-PMX9

Main unit SA-PMX9

Speakers SB-PMX9

WARNING!

CAUTION!

SC-PMX9EG-VQT4Z21.book 2 ページ２０１３年３月２２日　金曜日　午後４時５４分

ENGLISH

VQT4Z21

Supplied accessories

Check and identify the supplied accessories.

Maintenance

• To clean the main unit, wipe with a soft, dry cloth.

• To clean the speakers, wipe with a fine-textured and

dry cloth such as a microfibre cleaning cloth.

• Never use alcohol, paint thinner or benzine to clean

this system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Preparing the remote control

• Use alkaline or manganese battery.

• Install the battery so that the poles (+ and –) align with

those in the remote control.

• Point the remote control at the remote control sensor,

away from obstacles, at a maximum range of 7 m

directly in front of the main unit, within an angle of

approximately 30° to the left and right.

Making the connections

Connect the AC mains lead only after all the other

connections have been made.

1 Connect the FM indoor antenna.

Place the antenna where reception is best.

•

Use an FM outdoor antenna if radio reception is poor.

2 Connect the speakers.

Be careful not to cross (short-circuit) or reverse

the polarity of the speaker wires as doing so may

damage the speakers.

• Connect the cable with a red line to the red terminal

(r).

3 Connect the AC mains lead.

Do not use an AC mains lead with other equipment.

Conserving power

The system consumes approximately 0.4 W when it is in standby

mode. Disconnect the power supply if you do not use the system.

Some settings will be lost after you disconnect the

system. You have to set them again.

You can connect a VCR, DVD player etc.

Note:

• Disconnect the AC mains lead before connection.

• Switch off all equipment and read the appropriate operating

instructions.

• Components and cables are sold separately.

• If you want to connect equipment other than those

described, refer to the audio dealer.

• Sound distortion can occur when you use an adaptor.

• For information on the connection of a LAN cable, refer to

page 6.

1 x AC mains lead 1 x Remote control

(N2QAYB000896)

1 x FM indoor antenna 1 x Remote control

battery

2 x Speaker cables

R6/LR6, AA

To household mains socket

Tape

(not supplied)

Black

Red

Black Red

Cable with

a red line

Connecting other equipment

DVD player (not supplied)

Rear panel of

this main unit

Audio cable (not supplied)

SC-PMX9EG-VQT4Z21.book 3 ページ２０１３年３月２２日　金曜日　午後４時５４分

VQT4Z21

ENGLISH

Placement of speakers

Place the speakers so that the tweeter is on the inner

side. To prevent damage to the speakers, do not touch

the speaker cones if you remove the nets.

Use only the supplied speakers.

The combination of the main unit and speakers give the

best sound. You can cause damage to the system and

decrease the sound quality if you use other speakers.

Note:

• Keep your speakers more than 10 mm from the main unit

for ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic shielding. Do not

put them near TVs, PCs or other equipment easily

influenced by magnetism.

• When you play at high levels for a long period, it can cause

damage to the system and decrease the life of the system.

• Decrease the volume in these conditions to prevent

damage:

- When you play distorted sound.

- When you adjust the sound quality.

Overview of controls

1 Standby/on switch [Í], [Í/I]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still

consuming a small amount of power.

2 Numeric buttons [1 to 9, 0, S10]

To select a 2-digit number

Example: 16: [S10]

> [1] > [6]

3 Delete a programmed track

4 Select audio source

5 Basic playback control

6 Select the sound effects

7 View the iPod menu

8 View content information

9 Clock and timer operation

10 Set the programme function

11 Adjust the volume of the system

12 Mute the sound of the system

Press the button again to cancel.

“MUTE” is also cancelled when you adjust the

volume or when you switch off the system.

13 Set the play menu item

14 Set the radio menu item

15 Select the option

16 Enter setup menu

17 “iPod_Dock” for iPod/iPhone

18 Headphones jack ( )

• Plug type: Ø 3.5 mm stereo (not supplied)

• Avoid listening for prolonged periods of time to

prevent hearing damage.

• Excessive sound pressure from earphones and

headphones can cause hearing loss.

• Listening at full volume for long periods may

damage the user’s ears.

19 Display panel

20 “iPod_Port” for iPod/iPhone/iPad and USB devices

21 Open or close the disc tray

22 Disc tray

23 Remote control sensor

CAUTION!

• Use the speakers only with the recommended

system. If not, you can cause damage to the

amplifier and speakers and can cause a fire.

Consult an approved service personnel if damage

occurs or if there is a sudden apparent change in

performance.

• Do the procedures included in these instructions

when you attach the speakers.

Tweeter

OPEN/CLOSE

D.BASS

VOLUME

SELECTORCDiPod

BASS TREBLE

iPad

SETUP

SELECTOR

Top view

[iPod]: “iPod_Dock” ,. “iPod_Port” / “USB”

[CD]: “CD”

[SELECTOR]:

“CD”

----------------. “BLUETOOTH” -----------------. “FM”

“iPod_Port” / “USB”

(

“iPod_Dock”

(

“AUX”

SC-PMX9EG-VQT4Z21.book 4 ページ２０１３年３月２２日　金曜日　午後４時５４分

ENGLISH

VQT4Z21

Inserting media

“iPod_Dock” (Using Lightning connector):

• Make sure that the iPod/iPhone is fully inserted and its

back is resting against the cushion pad.

• Make sure to remove the iPod/iPhone from its case.

• Make sure to align your iPod/iPhone with the

connector when inserting.

“iPod_Port”:

• Use the dedicated USB cable (not supplied) for iPod/

iPhone/iPad.

• Insert the USB device directly. Do not use any USB

extension cable.

• Before removing the USB device, select a source other

than “USB”.

Disc tray:

• Remove the CD only after it stops rotating.

Charging starts when an iPod/iPhone/iPad is connected

to this system.

• During standby mode, charging will not start from the

“iPod_Port” connection, however it will start as usual

from the “iPod_Dock” connection.

- To charge from the “iPod_Port” connection, start the

charging before turning this unit to standby mode.

• See the iPod/iPhone/iPad display for its battery

charging status.

• Disconnect the iPod/iPhone/iPad if it is not used for an

extended period of time after charging is complete.

• Charging stops when the battery is fully charged. The

battery will deplete naturally.

Media information

• Please be aware that Panasonic accepts no

responsibility for the loss of data and/or information.

Compatible with “iPod_Dock” connection

(Using Lightning connector)

Compatible with “iPod_Port” connection

[Using dedicated USB cable (not supplied)]

Note:

• Compatibility depends on the software version. Update

your iPod/iPhone/iPad to the latest software before

using it with this unit.

• Read the User Guide of the iPod/iPhone/iPad for the

operating instructions.

• USB devices that support bulk-only transfer.

Note:

• Files are defined as tracks and folders are defined as

albums.

• Track must have the extension “.mp3”, “.MP3”, “.flac” or

“.FLAC”.

• This system can access up to:

- 255 albums (including root folder)

- 2500 tracks

- 999 tracks in one album

• CBI (Control/Bulk/Interrupt) is not supported.

• Some files can fail to work because of the sector size.

• NTFS file system is not supported (only FAT16/FAT32 file

system is supported).

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

Note:

• Some CD-R/RW cannot be played because of the

condition of the recording.

• MP3 files are defined as tracks and folders are defined as

albums.

• This system can access up to:

- CD-DA: 99 tracks

- MP3: 999 tracks, 255 albums (including root folder) and

20 sessions

• Recordings will not necessarily be played in the order you

recorded them.

iPad

OPEN/CLOSE

iPod/iPhone

(not supplied)

Lightning connector

Select “iPod_Dock” as the source

Open the cover and connect an iPod/iPhone with

Lightning connector.

Select “iPod_Port” as the source

“USB” is displayed when a compatible

USB device is inserted.

• Do not connect the following models:

iPod classic, iPod [4th (colour display),

and 5th (video) generation], iPod nano

(1st generation)

Unexpected behaviour may occur.

Select “CD” as the

source

Charging an iPod/iPhone/iPad

Compatible iPod/iPhone/iPad (as of January 2013)

iPod touch (5th generation)

iPod nano (7th generation)

iPhone 5

iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)

iPod nano (2nd, 3rd, 4th, 5th, 6th, and 7th generation)

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS /

iPhone 3G / iPhone

iPad (3rd, and 4th generation) / iPad 2 / iPad

iPad mini

Compatible USB devices

Compatible CD

SC-PMX9EG-VQT4Z21.book 5 ページ２０１３年３月２２日　金曜日　午後４時５４分

VQT4Z21

ENGLISH

Network settings

You can stream music from an iOS device (iPhone, iPod,

iPad), an Android™ device or a Mac/PC to this system’s

speakers by using the AirPlay or DLNA feature.

To use these features, this system must join the same

network as the AirPlay compatible device (> 9) or the

DLNA compatible device.

• It is also possible to use AirPlay without a network router.

(> 10, “Directly streaming to this system (AirPlay)”)

• Switching between a wired LAN connection and a wireless

LAN connection may cause the connection settings to be

initialized. In that case, make the settings again.

• For a stable connection to the network, a wired LAN

connection is recommended.

Normally, just connecting a LAN cable will complete the setup.

1 Connect the main unit to a broadband router, etc.

using LAN cable while the AC mains lead is

disconnected.

2 Connect the AC mains lead to the main unit and

turn this system on.

This unit is ready for use when “ ” is indicated on

the display.

• The LAN cable must be connected or disconnected

while the AC mains lead is disconnected.

• Use category 5 or above straight LAN cables (STP)

when connecting to peripheral devices.

• Inserting any cable other than a LAN cable in the LAN

port can damage the unit.

• When a LAN cable is connected, wireless settings will

be cancelled.

This system has built-in Wi-Fi

and can be connected to

a wireless router.

Preparation

• Place this system as close to the wireless network

router as possible.

• Disconnect the LAN cable.

• Point the antenna on the rear of

the main unit up as shown in the

figure.

• Do not perform the following:

- Tilting the antenna forward or

backwards when it is pointing up

- Applying too much force to the

antenna

- Carrying this unit by holding the antenna

1 Turn this system on.

2 Follow the chart below to choose the network

setting method.

Wired LAN connection

LAN Cable

(not supplied)

Broadband router, etc.

e.g.,

You can perform network-related settings individually.

jIf your home wireless network has been configured to

use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

jIf you want to change the name of this system that is

displayed as the AirPlay speakers or DLNA renderer.

1 Connect the main unit directly to your computer using

LAN cable while the AC mains lead is disconnected.

2 Connect the AC mains lead to the main unit and turn

this system on.

3After

“ ” is indicated on the display,

check the IP

address for this unit. (

15, “IP/MAC Address”)

4 Press [SETUP] on the remote control repeatedly to

select “Net Setup” and then press [OK].

5 Press [SETUP] on the remote control repeatedly to

select “Manual” and then press [OK].

6 When “Setting” blinks on the display, start an Internet

browser on your computer and then type the IP address

for this unit checked in step 3 into the address field and

display the setup screen.*

7 Select and input the details.

8 Select “JOIN” to apply the settings.

9 The settings are completed when “Success” is displayed.

10 Turn off this unit and then disconnect the AC mains lead.

11 Perform “Wired LAN connection”. (> left)

* It may take a few minutes until the setup screen is

available to be displayed on the browser depending on

the environment.In that case, reload the browser.

Wireless LAN connection

Wireless router, etc.

e.g.,

Does your wireless network router support

WPS?

Yes

“Method 1”

l 7,

“Method 2”

l 7,

“Method 3”

No / Do not know

Yes No

Are you using an

iPod touch/iPhone/iPad?

Is the iOS version 5.0 or later?

SC-PMX9EG-VQT4Z21.book 6 ページ２０１３年３月２２日　金曜日　午後４時５４分

ENGLISH

VQT4Z21

• If you want to perform wireless setting with your

Mac/PC, or you want to apply the advanced setting,

try “Method 4” on page 8.

• To cancel this setting in the middle, press [Í] to turn off this

system.

• Simultaneous use with other 2.4 GHz devices, such as

microwaves, cordless telephones, etc., may result in

connection interruptions.

• For up to date compatibility information on your wireless

network router refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

∫ Using the WPS Push Button Configuration

(PBC)

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK]. *1

“With iPod” is indicated on the display.

2 Press [SETUP] on the remote control repeatedly

to select “WPS Push” and then press [OK]. *1

“WPS” flashes on the display.

• Complete step 3 within 2 mins.

3 After “WPS” is indicated, press the WPS button

on the wireless network router.

4 The settings are completed when “Success” is

displayed.

“ ” is indicated on the display.

5 Press [OK] on the remote control to exit the

setting.

• This system can also be set using the WPS PIN code.

(Before starting, refer to the wireless network router’s operating

instructions for details on how to enter the PIN code.)

1 Press [SETUP] on the remote control repeatedly to

select “Net Setup” and then press [OK]. *2

2 Press [SETUP] on the remote control repeatedly to

select “WPS PIN” and then press [OK]. *2

3 Enter the PIN code into the wireless network router.

*1 Replace with the following step.

Press and hold [D.BASS] on the main unit for 2 seconds

while pressing and holding [∫] on the main unit.

*2 Replace with the following steps.

1 Press and hold [D.BASS] on the main unit for 2 seconds

while pressing and holding [∫] on the main unit.

2 When “WPS” is indicated, press and hold [D.BASS] on

the main unit for 2 seconds while pressing and holding

[∫] on the main unit again.

With this method you will share the wireless network

settings of your iPod touch/iPhone/iPad with this system.

• The following explanations are based on an iPhone.

1 Disconnect iPod/iPhone/iPad connected to the

main unit.

2 Connect the iPhone to your home wireless

network.

3 Connect the iPhone to the main unit.

4 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

“With iPod” is indicated on the display.

5 Unlock your iPhone and then press [OK] on the

remote control.

“Connecting Wi-Fi” is indicated on the display.

• If “Not Supported” or “Set Wi-Fi” is displayed, check

that the iPhone is connected to the wireless network

and try again from step 1.

6 A message will pop-up on your iPhone.

Allow the iPhone to share the wireless network

settings.*

7 The settings are completed when “Success” is

displayed.

“ ” is indicated on the display.

8 Press [OK] on the remote control to exit the

settings.

*1: Depending on the network environment or the wireless

network router settings, it may take more than 10 mins.

to complete the settings.

You can make the wireless network settings with the

app, “Panasonic Stereo System Network Setup” (for

free).

If you’re using an Android device, download the app at

Google Play™. If you’re using an iPod touch/iPhone/

iPad, download it at the App Store.

Preparation

• Connect your smartphone to your home wireless

network.

• Check the password for your home wireless network.

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

“With iPod” is indicated on the display.

2 Press [SETUP] on the remote control repeatedly

to select “Manual” and then press [OK].

“Setting” blinks on the display.

3 Start “Panasonic Stereo System Network Setup”

on your smartphone and follow the indications.

(Continued on the next page)

Method 1

If your wireless network router supports WPS

(Wi-Fi Protected Setup

The WPS identifier mark

WPS Push Button Configuration

(PBC) compatible wireless

network router may have this

mark.

“Fail” may be displayed if the connection was not made

within the set time limit. Try the setting again. If “Fail” is

still displayed, try other methods on page 7 or 8.

Method 2

If you're using an iPod touch/iPhone/iPad.

(iOS version 5.0 or later.)

If “Fail” is displayed press [OK] and try the setting

again. If “Fail” is still displayed, try other methods on

page 7 or 8.

• If the iPhone was disconnected midway through, try

again without disconnecting it.

Method 3

Setting the network connection with the smartphone

app.

SC-PMX9EG-VQT4Z21.book 7 ページ２０１３年３月２２日　金曜日　午後４時５４分

VQT4Z21

ENGLISH

∫ Note for the iOS version

After step 3

1 Enter the password for the home wireless network

to which the iOS device is connected.

2 When a message instructing you to connect the iOS

device to this system is displayed, press the home

button.

3 On the Wi-Fi network selection screen in “Settings”,

select “00 Setup _ _ _ _ _ _”.

• “ _ ” stands for a digit that is unique to each set.

4 When a message indicating the completion of the

connection to this system is displayed, restart the

app.

5 When a message indicating the completion of the

Wi-Fi setup of this system is displayed, close the

app, and then check the operation of AirPlay, etc.

• “Panasonic Stereo System Network Setup” for Mac OS is

also available at the Mac App Store.

With this method, you will access this system’s wireless

network settings from the Internet browser of your

compatible device.

• The following explanations are based on an iPhone.

1 Press [SETUP] on the remote control repeatedly

to select “Net Setup” and then press [OK].

“With iPod” is indicated on the display.

2 Press [SETUP] on the remote control repeatedly

to select “Manual” and then press [OK].

“Setting” blinks on the display.

3 After “Setting” blinks, connect your compatible

device to this system’s wireless network named

“00 Setup _ _ _ _ _ _”.

• “ _ ” stands for a digit that is unique to each set.

• Make sure that DHCP is enabled for the network

setting on your compatible device.

4 Start the Internet browser on your compatible

device and type “http://192.168.1.12/” into the

URL address field and display the page.

This system’s setup window is displayed.

• Examples of Internet browsers

iOS device/Mac : Safari

Android device : Google Chrome™

PC : Windows Internet Explorer

5 Select “Search wireless network”.

6 Select and input the details.

• Check your home wireless network name (Network

name (SSID)) and password for this network. This can

often be found on the wireless network router itself.

7 Select “JOIN” to apply the settings.

• In the pop-up screen, select “OK” to continue.

• Select “Cancel” to return to the setup window.

8 The settings are completed when “Success” is

displayed.

“ ” is indicated on the display.

9 Make sure to connect your compatible device

back to your home wireless network.

*1: If you have set your wireless network to be invisible,

select “BACK” and refer to “Alternative settings”. (> 9)

Method 4

Setting the network connection from an Internet

browser.

[1] Select your home wireless network

name.*

[2] Type the password.

If “Fail” is displayed press [OK], check the wireless

network password and other settings and start again

from step 1.

SC-PMX9EG-VQT4Z21.book 8 ページ２０１３年３月２２日　金曜日　午後４時５４分

ENGLISH

VQT4Z21

• The below settings are the alternative or additional settings

for “Method 4”. (> 8)

• Enable Java and Cookies in your browser settings.

Using AirPlay with this system’s

speakers

Preparation

• Complete the network settings. (> 6)

• Connect the iOS device or Mac/PC to the same home

network as this system.

1 Turn this system on.

• Check that “ ” is indicated on the display.

• If it doesn’t be indicated, check the network

settings. (> 6)

2 iOS device: Start the “Music” (or iPod) app.

Mac/PC: Start “iTunes”.

• If the Music app on your iOS device is used, select the

audio file you want to play.

3 Select “Panasonic PMX9 _ _ _ _ _ _”*

1, 2

from the

AirPlay icon.

{. Check the volume settings before starting the

playback. (When AirPlay is used for the first time, the

volume may be output at the maximum setting.)

4 Start play.

• The playback will start with a slight delay.

• This system can be set to turn on automatically when this

system is selected as the output speakers.

(> 15, “Network standby”)

• Playback of other audio sources will stop and AirPlay

output will have priority.

• Volume changes on the iOS device or iTunes will be

applied to this system. (Refer to the iTunes Help for the

required settings in iTunes.)

• With some iOS and iTunes versions, it may not be possible

to restart the AirPlay playback if the selector is changed

(e.g., “CD”) or this system is turned off, during the AirPlay

playback.

In this case, select a different device from the AirPlay icon

of the Music App or iTunes and then re-select this system

as the output speakers.

• AirPlay will not work when playing back videos on iTunes.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this system can be

changed from the “Edit STEREO SYSTEM name”

settings.

left, "Advanced network settings")

(as of January 2013)

Advanced network settings

Alternative settings

Instead of steps 5 and 6

Select “Manual settings”.

1 Type your home wireless network name into the

“Network name (SSID)” field.

2 Select the encryption method from the “Security

system” drop down list.

3 Type the password into the “Password” field and

then select “JOIN”.

Additional settings

If your home wireless network has been configured to

use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Before step 7

Select “Advanced network settings”.

Input the required addresses into each field and select “JOIN”.

• To change the settings back to DHCP, select “ON” from

the “DHCP” drop down list.

If you want to change the name of this system that

is displayed as the AirPlay speakers or DLNA

renderer.

Before step 5

Select “Additional settings”.

1 Select “Edit STEREO SYSTEM name”.

2 Type a new name into the

“STEREO SYSTEM name” field.

{. Only ASCII characters can be used.

3 Select “OK”.

4 If this system is already connected to your home

wireless network:

– Select “

Additional settings

”, and then select “

Exit

”.

If this system is not connected to your home

wireless network:

j Continue to step 5 of “Method 4”.

PMX9

e.g.,

“Music” app.

iPhone iOS 6.0.1

PMX9

e.g.,

iTunes 11.0

Compatible AirPlay devices

iOS 4.3.3 or later

iPod touch

3rd, 4th, and 5th generation

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS

iPad (3rd, and 4th generation) / iPad 2 / iPad

iPad mini

iTunes 10.2.2 or later (Mac / PC)

SC-PMX9EG-VQT4Z21.book 9 ページ２０１３年３月２２日　金曜日　午後４時５４分

VQT4Z21

ENGLISH

With this function set to “On”, you can stream music from

the iOS device or Mac / PC (iTunes 10.2.2 or later) to

this system without the need of a network router.

• Previous network settings will be deleted when this

function is set to “On”.

• The following explanations are based on an iPhone.

1 Press [SETUP] repeatedly to select “D.Connect”.

2 Press [2, 1] to select “On” and then press [OK].

3 Press [2, 1] to select “OK? Yes” and then press

[OK].

4 Connect your iPhone to this system’s wireless

network named “PMX9 _ _ _ _ _ _”*

5 Enter the password that is indicated on this

system’s display.

6 Once the iPhone is connected to this system’s

wireless network, the setup is competed.

7 Continue to step 2 of “Using AirPlay with this

system’s speakers”. (> 9)

• This setting is reset to “Off” when other network settings

are performed. (> 6)

• When “D.Connect” is set to “On”, this system will not be

connected to the Internet. It is not possible to update the

software or check the Wi-Fi signal strength.

• When AirPlay is not being used, disconnect the AirPlay

compatible device from this network.

• When using a computer on this network, make sure that all

the shared files are encrypted.

• This feature is only compatible with the “Open System”

authentication method. It is not compatible with “Shared

Key” authentication method.

*1: “ _ ” stands for a digit.

*2: “ _ ” stands for a digit that is unique to each set.

The first time “D.Connect” is set to “On”, a password for

this system’s network is randomly created and

memorised in this system.

• This password is memorised until it is changed.

1 While “D.Connect” is set to “On”:

Press [SETUP] repeatedly to select “D.Connect”.

2 Press [2, 1] to select “On” and then press [OK].

3 The current password is displayed.

• The 5 digits after “PW” is the password for this

network.

4 Press any button to exit.

1 While “D.Connect” is set to “Off”:

Press [SETUP] repeatedly to select “D.Connect”.

2 Press [2, 1] to select “Change PW” and then press

[OK].

3 Press [2, 1] to select “OK? Yes” and then press

[OK].

4 The new password is displayed.

• The 5 digits after “PW” is the new password for

this network.

5 Press any button to exit.

∫ Note about changing the password

After changing this system’s network password, if you

are not prompted to change the password on the other

devices, the following changes are required.

iOS device (iPod touch/iPhone/iPad)

• Before choosing this system’s network,

1 Select [ ] located beside this system’s wireless

network name.

Select “Forget this Network” and then select “Forget”.

3 Select this system’s wireless network and enter the

new password.

Mac/PC:

• If the computer has memorised the old password, be

sure to change the memorised password for this

system’s network to the new one.

• Refer to the devices’s operating instructions for details.

*1:

Steps are based on iOS 6.0.1.

Playing back music files on the

DLNA server

You can share music files stored in the DLNA Certified

media server (PC with Windows 7 installed, smartphone,

etc.) connected to your home network, and enjoy the

contents with this system’s speaker.

Preparation

• Complete the network settings. (> 6)

• Connect your device with DMC (Digital Media

Controller) compatible software installed to the same

home network as this system.

• Add the contents and folder to the libraries of the

Windows Media

Player or the smartphone, etc.

– Playlist of Windows Media

Player can play back only

the contents that are stored in the libraries.

1 Turn this system on.

• Check that “ ” is indicated on the display.

• If it doesn’t be indicated, check the network

settings. (> 6)

2 Operate the DMC compatible device and connect

to this system.

• The device name of this system will be displayed

as “Panasonic PMX9 _ _ _ _ _ _”*

1, 2

• For details on how to use DMC compatible

devices, refer to the operating instructions of the

devices or the software.

∫ Support format of DLNA client

File formats that are not supported by your DLNA server

cannot be played.

• Depending on the contents and the connected equipment,

playback may not be possible.

*1: “ _ ” stands for a digit that is unique to each set.

*2: The name that is displayed for this system can be

changed from the “Edit STEREO SYSTEM name”

settings. (

9, “Advanced network settings”)

Directly streaming to this system

(AirPlay)

“PW _ _ _ _ _”*

is displayed.

The 5 digits after “PW” is the password for this

network.

PMX9

Display the password

Change the password

Audio codec Example of file extension

MP3 .mp3

WAV .wav

FLAC .flac

SC-PMX9EG-VQT4Z21.book 10 ページ２０１３年３月２２日　金曜日　午後４時５４分

SUOMI

VQT4Z21

Virtalähde AC 220 V sitä 240 V, 50 Hz

Virrankulutus 60 W

Mitat (L x K x S) 210 mm x 120 mm x 266 mm

Massa Noin 3,1 kg

Käyttöympäristön lämpötila-alue 0°C sitä +40°C

Käyttöympäristön kosteusalue

35 % sitä 80 % suht. kosteus (ei tiivistyvä)

Huomautus:

• Tekniset tiedot voivat muuttua ilman eri ilmoitusta. Massa ja

mitat ovat likimääräisiä arvoja.

• Harmoninen kokonaissärö on mitattu digitaalisella

spektrianalysaattorilla.

FLAC Decoder

Josh Coalson

Redistribution and use in source and binary forms, with or

without modification, are permitted provided that the following

conditions are met:

- Redistributions of source code must retain the above

disclaimer.

- Redistributions in binary form must reproduce the above

disclaimer in the documentation and/or other materials

provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the

names of its contributors may be used to endorse or

promote products derived from this software without

specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

HOLDERS AND CONTRIBUTORS “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Yleistä

Virrankulutus valmiustilassa

(Kun iPod/iPhone/iPad ei ole lataamassa)

0,4 W (noin)

Vakuutus vaatimustenmukaisuudesta (DoC)

“Panasonic Corporation” vakuuttaa, että tämä tuote on

yhdenmukainen direktiiviin 1999/5/EC keskeisten

vaatimusten sekä sen muiden merkityksellisten määräysten

kanssa.

Asiakkaat voivat ladata alkuperäisen DoC:n kopion

R&TTE-tuotteillemme DoC-palvelimelta:

http://www.doc.panasonic.de

Valtuutetun edustajan yhteystiedot:

Panasonic Marketing Europe GmbH,

Panasonic Testing Centre, Winsbergring 15, 22525

Hamburg, Saksa

Tämä tuote on tarkoitettu tavallisille kuluttajille. (Luokka 3)

Tämä tuote on tarkoitettu liitettäväksi 2,4 GHz:n

WLAN-liityntäpisteeseen.

Vanhojen laitteiden ja akkujen hävittäminen

Ainoastaan Euroopan yhteisölle ja maille

kierrätysjärjestelmien kanssa

Nämä tuotteessa, pakkauksessa ja/tai

sen mukana toimitettavissa asiakirjoissa

olevat tunnukset tarkoittavat sitä, että

käytettyjä sähkö- ja elektroniikkalaitteita

sekä akkuja/paristoja ei saa laittaa

tavallisen kotitalousjätteen sekaan.

Vanhojen tuotteiden ja akkujen/

paristojen kunnollista käsittelyä,

uudelleenkäyttöä ja kierrätystä varten

ole hyvä ja toimita nämä tuotteet asianmukaiseen

keräyspisteeseen kansallisen lainsäädännön

mukaisesti.

Niiden moitteeton hävittäminen auttaa säästämään

arvokkaita resursseja ja se ehkäisee ihmisten

terveyteen sekä ympäristöön vaikuttavia

haittavaikutuksia.

Jos haluat lisätietoja keräämisestä ja kierrätyksestä,

ota yhteyttä paikallisiin viranomaisiin.

Tämän romun virheellinen hävittäminen voi johtaa

rangaistustuomioon kansallisen lainsäädännön

mukaisesti.

Huomautus akun/pariston tunnusta

varten (alla oleva tunnus):

Tätä tunnusta saatetaan käyttää

yhdessä kemiallisen tunnuksen kanssa.

Tässä tapauksessa se täyttää direktiivin

asettamat vaatimukset kyseessä

olevalle kemialliselle aineelle.

SC-PMX9EG-VQT4Z21.book 19 ページ２０１３年３月２２日　金曜日　午後４時５４分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-PMX9 in the language / languages: English, Polish, Finnish as an attachment in your email.

The manual is 5,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-PMX9

Panasonic SC-PMX9 User Manual - English - 20 pages

Panasonic SC-PMX9 Quick start guide - English - 1 pages

Panasonic SC-PMX9 User Manual - English - 3 pages

Panasonic SC-PMX9 User Manual - German - 128 pages

Panasonic SC-PMX9 Quick start guide - German - 4 pages

Panasonic SC-PMX9 User Manual - Dutch - 128 pages

Panasonic SC-PMX9 Quick start guide - Dutch - 4 pages

Panasonic SC-PMX9 User Manual - Danish - 128 pages

Panasonic SC-PMX9 Quick start guide - Danish - 4 pages

Panasonic SC-PMX9 User Manual - French - 128 pages

Panasonic SC-PMX9 Quick start guide - French - 4 pages

Panasonic SC-PMX9 User Manual - Italian - 128 pages

Panasonic SC-PMX9 Quick start guide - Italian - 4 pages

Panasonic SC-PMX9 User Manual - Polish - 3 pages

Panasonic SC-PMX9 User Manual - Swedish - 128 pages

Panasonic SC-PMX9 Quick start guide - Swedish - 4 pages

Panasonic SC-PMX9 User Manual - Spanish - 128 pages

Panasonic SC-PMX9 Quick start guide - Spanish, Finnish - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic SC-PMX9 Manual

Product: