502233

Panasonic SC-PM500 Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
ENGLISHENGLISH
RQT9537
9
9
Clock and timers
Setting the clock
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
2 Within 10 seconds, press [R, T] to set the time.
3 Press [OK].
Press [CLOCK/TIMER] to show the clock for a few
seconds.
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
30 MIN → 60 MIN → 90 MIN → 120 MIN → OFF
To show the remaining time
Press [SLEEP].
Note:
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
You can set the timer to come on at a certain time to wake
you up.
Switch on the system and set the clock.
Prepare the music source you want to listen to (disc, radio,
USB, iPod or iPhone) and set the volume.
Selecting a preset station
Press the numeric buttons, [2] or [6] (main unit:
[2/3] or [5/6]) to select the preset station.
AM allocation setting (by main unit only)
This system can also receive AM broadcasts allocated in
10 kHz steps.
1 Press [RADIO/EXT-IN(USB)] to select “FM” or
“AM”.
2 Press and hold [RADIO/EXT-IN(USB)].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• After you change the setting, preset frequencies are
erased.
RDS broadcasting
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY].
PS
(Station name)
FREQ
(Frequency)
PTY
(Program type)
→
→
Note:
RDS may not be available if reception is poor.
1 Press [CLOCK/TIMER] to select “#PLAY 1”,
“#PLAY 2” or “#PLAY 3”.
2 Within 10 seconds, press [R, T] to set the start
time.
3 Press [OK].
4 Do steps 2 and 3 again to set the end time.
To start the timer
5 Press [#, PLAY] to start “#PLAY 1”, “#PLAY 2” or
“#PLAY 3”.
6 Press [`] to switch off the system.
The system must be switched off for the timer to
operate.
Change the
settings
Do steps 1 through 4 and 6 again
(Z above).
Change the
source or
volume
1) Press [#, PLAY] two times to remove
the timer indicator on the display
panel.
2) Change the source or volume.
3) Do steps 5 and 6 (Z above).
Check the
settings
Press [CLOCK/TIMER] to select
“#PLAY 1”, “#PLAY 2” or “#PLAY 3”.
Cancel
Press [#, PLAY] two times to remove the
timer indicator on the display panel.
Note:
• The timer starts at a low volume and increases gradually
to the preset level.
• The timer comes on at the set time every day if the timer
is on.
• If you switch off the system and switch on again while
a timer is in operation, the timer will not stop at the end
time.
PM500_EP1_1gb.indd 9PM500_EP1_1gb.indd 9 6/20/2011 6:30:18 PM6/20/2011 6:30:18 PM
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-PM500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-PM500 in the language / languages: Polish as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-PM500

Panasonic SC-PM500 User Manual - German, Dutch, Danish - 80 pages

Panasonic SC-PM500 User Manual - French - 2 pages

Panasonic SC-PM500 User Manual - French, Italian, Swedish, Spanish - 80 pages

Panasonic SC-PM500 User Manual - Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info