Manual Panasonic SC-PM02 (page 2 of 2) (English)

502244

Zoom out

Zoom in

1/2

CONTROL GUIDE

E [PROGRAM] (2, 4)

[REPEAT] (2)

[PLAY MODE] (2, 4)

F [4/9, USB] (3, 8)

[4/9, CD] (2)

G [2/3], [5/6] (2, 4, 6)

H [RE-MASTER] (6)

I [BASS] ( 6)

J [R/T] (2, 5)

[Y/U] have the exact same functions as

those of [2/3] or [5/6].

[OK] (2, 5, 7)

K [DISPLAY] (2, 4)

L [AUTO PRESET] (4)

M [TUNE MODE] (4)

N [#, PLAY] (5)

O [CLOCK/TIMER] (5)

P [SLEEP] (5)

Q [AUTO OFF]

This function allows you to turn the unit off

(except in radio mode) after the unit is left

unused for about 30 minutes. “AUTO OFF” is

activated as the factory preset. Press twice to

cancel.

R Volume control [+/–, VOL

[+/–, VOLUME]

S [MUTE]

Mutes the sound. Press again to cancel.

“MUTE” is also cancelled when the volume is

adjusted or the unit is turned off.

T [MUSIC PORT], [MUSIC P.] (7 )

U [FM/AM] (4)

V [8] (2, 3)

W [D.BASS] (6)

X [PRESET EQ] (6)

Y [TREBLE] (6)

Z [SURROUND] (6)

a [INPUT LEVEL] (7)

b [FM MODE] (4)

c MUSIC P. (music port) jack (7)

d Display panel

e Remote control signal sensor

Aim the remote control at the remote control

signal sensor, avoiding obstacles, at a

maximum range of 7 m directly in front of the

unit.

f USB port,

(3)

g [BASS/TREBLE] (6)

h [x, OPEN/CLOSE] (2)

Refer to the numbers in parentheses for chapter

references.

A Standby/on switch [`], [1] (5, 8)

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

B [DIMMER]

Dims the display panel. Press again to cancel.

C Numeric buttons [1 to 9, 0, ≧10]

To select a 2-digit number

example: 16: [≧10] ] [1] ] [6]

To select a 3-digit number

example: 226: [≧10] ] [≧10] ] [2] ] [2] ]

[6]

D [DEL] (2)

Basic play

1 Press [ x, OPEN/CLOSE] on the main unit

to open the tray.

The unit turns on, load a disc with the label

facing up.

Press [x, OPEN/CLOSE] again to close the

tray.

2 Press [4/9, CD] to start play.

Stop

playback

Press [ 8].

Pause play

Press [4/9, CD]. Press again to

resume play.

Skip tracks

Press [ 2/3] or [5/6].

through

tracks

Press and hold [2/3] or

[5/6] during play or pause.

Skip album

Press [ R/T].

Play Mode function

Press [ PLAY MODE] to select the desired

mode.

1-TRACK

1TR

Play one selected track on the

disc.

Press the numeric buttons to

select the track.

1-ALBUM

1ALBUM

Play one selected album on the

disc.

Press [R/T] to select the album.

RANDOM

RND

Play a disc randomly.

1-ALBUM

RANDOM

1ALBUM RND

Play all tracks in one selected

album randomly.

Press [R/T] to select the album.

Program play

This function allows you to program up to 24

tracks.

1 Press [4/9, CD] and then [8].

2 Press [ PROGRAM].

3 Press the numeric buttons to select the

track.

Repeat this step to program other tracks.

4 Press [4/9, CD] to start play.

1 Press [4/9, CD] and then [8].

2 Press [ PROGRAM].

3 Press [R/T] to select the album.

4 Press [5/6] once and then the numeric

buttons to select the track.

5 Press [ OK].

6 Repeat steps 3 to 5 to program other

tracks.

7 Press [4/9, CD] to start play.

Cancel

program

mode

Press [PROGRAM] in the stop

mode.

Replay the

program

Press [PROGRAM] then

[4/9, CD] in the stop mode.

Check

program

contents

Press [2/3] or [5/6]

when “PGM” is displayed in

the stop mode.

To check while programming,

press [PROGRAM] twice after

“PGM” appears, then press

[2/3] or [5/6].

Clear the last

track

Press [ DEL] in the stop mode.

Clear all

programmed

tracks

Press [8] in the stop mode.

“CLR ALL” is displayed. Within

5 seconds, press the button

again to clear all tracks.

Note:

• The program memory is cleared when you open

the disc tray.

• To repeat program play or selected play mode,

press [ REPEAT]. Press again to cancel.

Checking the track information

You can view the information of the current track

from the display panel.

Press [ DISPLAY] during play or pause.

Note:

• This unit supports ver. 1.0 and 1.1 ID3 tags.

• Text data that is not supported will not be

displayed.

NOTE on CDs

• This unit can access up to 99 tracks.

• This unit can play MP3 ﬁ les and CD-DA format

audio CD-R/RW that have been ﬁ nalised.

• It may not be able to play some CD-R/RW due

to the condition of the recording.

NOTE on MP3s

• Files are treated as tracks and folders are

treated as albums.

• This unit can access up to 999 tracks,

255 albums and 20 sessions.

• Disc must conform to ISO9660 level 1 or 2

(except for extended formats).

• To play in a certain order, preﬁ x the folder and

ﬁ le names with 3-digit numbers in the order you

want them to play.

Limitations on MP3 play

• If you have recorded MP3s on the same disc

as CD-DA, only the format recorded in the ﬁ rst

session can be played.

• Some MP3s may not be played due to the

condition of the disc or recording.

• Recordings will not necessarily be played in the

order you recorded them.

FM/AM RADIO

Manual tuning

1 Press [ FM/AM] to select “FM” or “AM”.

2 Press [ TUNE MODE] to select “MANUAL”.

3 Press [ 2/3] or [5/6] to select the

frequency of the required station.

To tune automatically

Press and hold [2/3] or [5/6] until the

frequency starts changing rapidly.

• Auto tuning may be interrupted when there is

excessive interference.

• To cancel auto tuning, press [2/3] or

[5/6] once again.

To improve the sound quality

When “FM” is selected

Press [ FM MODE] to display “MONO”.

Press again to cancel.

• “MONO” is also cancelled if the frequency is

changed.

• Turn off “MONO” for normal listening.

When “AM” is selected

Press and hold [ TUNE MODE].

Each time you press and hold the button:

BP2

BP1

RDS broadcasting

This unit can display the text data transmitted by

the radio data system (RDS) available in some

areas.

Press [ DISPLAY] to display:

Note:

RDS displays may not be available if reception is

poor.

Station name

(PS)

]

Program type

(PTY)

]

Frequency

(FREQ)

Memory preset

30 FM and 15 AM stations can be preset.

Automatic presetting

1 Press [PLAY MODE] to select “CURRENT”

or “LOWEST” frequency.

2 Press [ AUTO PRESET] to start presetting.

Manual presetting

1 Press [TUNE MODE] to select “MANUAL”.

2 Press

[2/3] or [5/6]

to tune to the

required station.

3 Press [ PROGRAM].

4 Press the numeric buttons to select a

channel.

The station occupying a channel is erased if

another station is preset to that channel.

5 Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

1 Press [TUNE MODE] to select “PRESET”.

2 Press

[2/3] or [5/6] to select the

channel.

Alternatively, press the numeric buttons to select

the channel.

AM allocation setting

(by main unit only)

This system can also receive AM broadcasts

allocated in 10 kHz steps.

Press and hold [FM/AM].

After a few seconds the display changes to a

ﬂ ashing display of the current minimum frequency.

Release the button when the minimum frequency

changes.

• To return to the original step, repeat the above

steps.

• After changing the setting, previously preset

frequency will be cleared.

USB

The USB connectivity enables you to connect and

play MP3 tracks from USB mass storage device.

Preparation

Before connecting any USB mass storage device

to the unit, ensure that the data stored therein has

been backed up.

Do not use a USB extension cable. The USB

mass storage device connected via the cable will

not be recognised by this unit.

1 Reduce the volume and connect the USB

mass storage device to the USB port.

Hold the main unit when connecting or

disconnecting the USB mass storage device.

2 Press [ 4/9, USB] to start play.

Stop

playback

Press [ 8]. “RESUME” is

displayed.

The position is memorised.

Press [4/9, USB] to resume

play.

Press [8] again to clear the

position.

For other operations, they are similar as those

described in “DISCS”.

Compatible devices

Devices which are deﬁ ned as USB mass storage

class:

• USB devices that support bulk only transfer.

• USB devices that support USB 2.0 full speed.

Supported formats

• Track must have the extension “.mp3” or “.MP3”.

• CBI (Control/Bulk/Interrupt) is not supported.

• A device using NTFS ﬁ le system is not

supported. [Only FAT 12/16/32 (File Allocation

Table 12/16/32) ﬁ le system is supported.]

• Depending on the sector size, some ﬁ les may

not work.

• Maximum album: 255 albums

• Maximum track: 2500 tracks

• Maximum track in one album: 999 tracks

CLOCK AND TIMERS

Setting the clock

This is a 24-hour clock.

1 Press [ CLOCK/TIMER] to select “CLOCK”.

2 Within 10 seconds, press [R/T] to set the

time.

3 Press [ OK].

Note:

• Press [CLOCK/TIMER] to display the clock for

few seconds.

• Reset the clock regularly to maintain accuracy.

Using the sleep timer

This function enables you to turn off the unit

automatically after the set time.

Press [ SLEEP] to select your desired time.

30 MIN ] 60 MIN ] 90 MIN ] 120 MIN ] OFF

Press [SLEEP] to show the remaining time and

press [SLEEP] again to select your desired time.

Note:

• The play and sleep timer can be used together.

• The sleep timer always has priority. Make sure

not to overlap timer settings.

Using the play timer

You can set the timer to come on at a certain time

to wake you up

Turn the unit on and set the clock.

Prepare the music source you want to listen to;

disc, radio, USB or music port source and set the

volume.

1 Press [CLOCK/TIMER] to select

“ # PLAY 1”, “ # PLAY 2” or “ # PLAY 3”.

2 Within 10 seconds, press [R/T] to set the

starting time.

3 Press [OK].

4 Repeat steps 2 and 3 to set the ﬁ nishing

time.

To activate the timer

5 Press [ #, PLAY] to turn on “ # PLAY 1”,

“ # PLAY 2” or “ # PLAY 3”.

6 Press [ `] to turn off the unit.

Change the

settings

Repeat steps 1 to 4 and 6

(Z see above).

Change the

source or

volume

1) Press [#, PLAY] twice to

clear timer indicator from the

display.

2) Make changes to the source

or volume.

3) Perform steps 5 and 6

(Z see above).

Check the

settings

Press [CLOCK/TIMER] to

select

“ # PLAY 1”, “ # PLAY 2”

“

# PLAY 3

”

Cancel

Press [#, PLAY] twice to clear

the timer indicator from the

display

Note:

• The timer will start at the preset time, with the

volume increasing gradually to the preset level.

• The unit must be in standby mode for the timer

to function.

SOUND ADJUSTMENT

Preset EQ Press [ PRESET EQ] to select

“HEAVY”, “SOFT”, “CLEAR”,

“VOCAL” or “FLAT”.

Bass or

Tre ble

1) Press [ BASS] or [ TREBLE]

(main unit: [

BASS/TREBLE

]) to

select “BASS” or “TREBLE”.

2) Press [2/3] or [5/6]

to adjust the level (–4 to +4).

Surround

sound

Press [ SURROUND] to select

“ON SURROUND” or

“OFF SURROUND”.

If interference in FM stereo

reception increases, cancel the

surround sound effect.

D.Bass Press [ D.BASS] to select

“ON D.BASS” or “OFF D.BASS”.

Re-master

Press [ RE-MASTER] to select

“ON RE-MASTER” or

“OFF RE-MASTER”.

OPTIONAL EQUIPMENTS

Avoid interfering with other

Panasonic equipment

Other Panasonic audio or video equipment may

start functioning when you operate the unit using

the supplied remote control.

To solely operate this system, synchronise the

main unit with its corresponding remote control to

operate in “REMOTE 2” mode.

1 Press and hold [ MUSIC P.] on the main unit

and [ 2 ] until “REMOTE 2” is displayed.

2 Press and hold [ OK] and [ 2 ] for at least

2 seconds.

To change the mode back to “REMOTE 1”, repeat

steps 1 and 2 by replacing [ 2

] with [ 1 ].

Portable audio equipment

Turn off the equalizer function (if there is any) of

the portable audio equipment before you plug into

the MUSIC P. jack. Otherwise, sound from the

speaker may be distorted.

1 Plug the audio cord into the MUSIC P. jack.

2 Press [ MUSIC PORT] (

main unit: [MUSIC P.]

)

and play the portable audio equipment.

To adjust the sound input level

Press [ INPUT LEVEL] to select “HIGH” or

“NORMAL”.

Note:

• Cords and the equipment are not included.

• For details, refer to the portable audio

equipment’s instruction manual.

DISCS

Remote control

Main unit

MUSIC P.

Top of unit

Headphones jack ( )

Plug type: Ø 3.5 mm stereo (not included)

• Avoid listening for prolonged periods of time to prevent hearing

damage.

• Excessive sound pressure from earphones and headphones can

cause hearing loss.

• Listening at full volume for long periods may damage the user’s

ears. Be sure to use the supplied or recommended headphones or

earphones.

TROUBLESHOOTING GUIDE

■ Common problems

No response when remote control buttons are

pressed.

• Check that the batteries are installed correctly.

Distorted sound or no sound.

• Turn the volume up.

• Turn off the unit, determine and correct the

cause. Turn the unit on again. It may be caused

by straining of the speakers through excessive

volume or power, and using the unit in a hot

environment.

A “humming” sound can be heard during play.

• An AC mains lead or ﬂ uorescent light is near

the unit. Keep other appliances and cords away

from the unit.

■ Discs

Incorrect display or play will not start.

• You have not inserted the disc correctly; insert it

correctly.

• Disc may be dirty. Wipe it clean.

• Replace the disc if it is scratched, warped, or

non-standard.

• Condensation has formed: wait 1 to 2 hours for it

to evaporate.

■ Radio

A beat sound is heard.

• Turn off any television nearby or move the unit

away from any television.

• Switch to either BP 1 or BP 2 when in AM tuner

mode.

A low hum is heard during AM broadcast.

• Separate the antenna from other cables and

cords.

■ USB

No response when [

4/9

, USB] is pressed.

• Disconnect the USB device and then reconnect

it. Alternatively, turn the unit off and on again.

The USB drive or its contents cannot be read.

• The USB drive format or its contents is/are not

compatible with the system.

• The USB host function of this product may not

work with some USB devices.

• USB devices with storage capacity of more than

8 gigabytes may not work in some instances.

Slow operation of the USB device.

• Large ﬁ le size or high memory USB ﬂ ash drive

takes longer time to read.

“NO PLAY”

• Check the content.

• Only MP3 format ﬁ les can be played.

• If there are more than 255 albums or folders

(audio and non-audio), some of the MP3 ﬁ les

in these albums may not be read and played.

Transfer these music albums to another USB.

Alternatively, reformat the USB device and save

these music albums prior to saving the other

non-audio folders.

■ Unit displays

“F61” or “F76”

• Check and correct the speaker cords

connection.

If this does not ﬁ x the problem, consult the dealer.

• Disconnect the USB device. Turn the unit off and

on again.

“ERROR”

• Incorrect operation performed. Read the

instructions and try again.

“ADJUST CLOCK”

• Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

• Play timer is not set. Adjust the play timer

accordingly.

“AUTO OFF”

• The unit has been left unused for about

29 minutes and will turn off in a minute. Press

any button to cancel.

Memory reset (Initialisation)

When the following situations occur, refer to the

instructions below to reset the memory:

• There is no response when buttons are

pressed.

• You want to clear and reset the memory

contents.

To reset memory

1) Disconnect the AC mains lead. (Wait at

least 3 minutes before proceeding to

step 2.)

2) While pressing and holding down [1],

reconnect the AC mains lead.

“– – – – – – – –” appears on the display

panel.

3) Release [1].

All the settings are returned to the factory

preset.

You will need to reset the memory items.

Before requesting service, make the following checks. If you are in doubt about some of the check

points, or if the solutions indicated do not solve the problem, consult your dealer for instructions.

PM02_EB.indd 2PM02_EB.indd 2 6/24/2010 5:52:05 PM6/24/2010 5:52:05 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-PM02 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-PM02

Panasonic SC-PM02 User Manual - German, Dutch, Danish, French, Italian - 68 pages

Panasonic SC-PM02 User Manual - Polish - 48 pages

Panasonic SC-PM02 User Manual - Swedish, Spanish - 68 pages

Panasonic SC-PM02 User Manual - Finnish - 11 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic SC-PM02 Manual

Product: