696388
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
TQBM0483
Reference
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated in the
following guide do not solve the problem, consult
your dealer for instructions.
The unit does not work.
Operations are not done properly.
1 To uch [ Í/I] on the main unit to turn it off.
If the main unit still does not turn off, touch and hold
[Í/I] on the main unit for at least 5 sec. This will force
turn off the main unit. Alternatively, disconnect the AC
mains lead, wait for at least 3 minutes, then reconnect
it.
2 To uch [ Í/I] on the main unit to turn it on.
(It may take some time for the main unit to be
turned on.)
Consult your dealer if the problem persists.
No power.
Unplug the AC mains lead for at least 3 minutes
before plug in again.
After turning the main unit on, if the main unit
immediately turns off, unplug the AC mains lead
and consult your dealer.
If the main unit does not turn on by turning on
TV (HDAVI Control), turn on the main unit
manually.
If the problem persists, refer to “HDMI” in
“Troubleshooting”.
The remote control does not work properly.
The battery is depleted. Replace it with a new
one. (> 7)
It is possible that the insulation sheet has not
been removed. Remove the insulation sheet.
(> 7)
It may be necessary to set the code of the
remote control again after changing the battery
of the remote control. (> 17)
Use the remote control within the correct
operation range. (> 7)
The main unit is automatically switched to
standby mode.
“AUTO OFF” function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page
20 to turn this function off.
The main unit is turned off when the TV’s
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). Please read the
operating instructions for the TV for details about
its power save feature. (> 22)
The switches on the main unit do not work.
[Í/I], [VOL j], [VOL i], [INPUT], and [ ] on the
main unit are touch keys. Touch the switches with
your finger. They may not work if operated with
your fingernails or hands wearing gloves.
Colour irregularities on a CRT TV.
If colour irregularities appear on the TV, turn off
the TV for about 30 minutes and move TV away
from this unit slightly. If this does not fix the
problem, move this unit away from the TV.
The TV remote control does not work even
when the IR Blaster is connected to the main
unit.
When the TV receives signals from both its
remote control and the IR Blaster, their signals
may interfere with each other, making it
impossible for you to operate the TV. Adjust the
angle at which you operate the TV remote control.
(> 11)
If this system does not operate as
expected, returning the settings to the
factory preset may solve the problem.
To return to the factory preset.
1 Press [SETUP] repeatedly to select
“RESET” and then press [OK].
You can also press [4] or [3] repeatedly to select
the setup item.
2 Press [4][3] to select “OK?YES” and
then press [OK].
“RESET” blinks on the display. After the “RESET”
display goes out, “TV” is selected as the source for
this system.
The remote control code will return to
“REMOTE 1” when this system is returned to
the factory preset. To change the remote
control code, refer to “Remote control code”
(> 17).
General operation
SC-HTB700-EGEBGNGW-TQBM0483_eng.book 24 ページ 2019年6月6日 木曜日 午前10時21分
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB700 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB700

Panasonic SC-HTB700 User Manual - German, Dutch, French, Italian, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info