618143
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
RQT9785
The main unit is automatically switched to
standby mode.
The auto standby function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 2 hours. Refer to page 30
to turn this function off.
The main unit is turned off when the TV’s
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). Please read the
operating instructions for the TV for details about
its power save feature. (> 28)
This system does not operate correctly.
If the HDMI cable is connected to the wrong
terminal (HDMI IN or HDMI OUT), this system will
not operate correctly. Turn the main unit off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). (> 22, 23)
VIERA Link related operations no longer
function properly.
Check the VIERA Link setting on the connected
devices.
Have you turned the VIERA Link settings off?
(> 31)
When the HDMI connections are changed,
after a power failure or after the AC mains lead
has been removed, VIERA Link operations may
not function properly.
jTurn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
jTurn off the VIERA Link settings of the TV
and turn it on again. For details refer to the
operating instructions for the TV.
jWhile the main unit and the TV are
connected with the HDMI cable, turn on the
TV and then remove the main unit’s AC
mains lead and reconnect it again.
The first few seconds of audio cannot be
heard when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output setting
on the connected device from “Bitstream” to
“PCM”.
When operating an HDMI compatible device
of a different brand, the main unit reacts in an
unwanted manner.
HDAVI Control commands may use a different
signal depending on the brand of the device. In
this case, turn VIERA Link off. (> 31)
Pairing cannot be done.
Check the Bluetooth
®
device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or
the registration has been replaced. Try pairing
the device again. (> 25)
This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
For some built-in Bluetooth
®
devices, you have to
set the audio output to “SC-HTB570” manually.
Read the operating instructions for the device for
details.
The sound is interrupted.
The device is out of the 10 m communication
range. Bring the Bluetooth
®
device closer to the
main unit.
Remove any obstacle between the main unit
and the device.
Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth
®
device closer to the main unit and
distance it from the other devices.
Select “MODE1” for stable communication.
(> 29)
No sound (or image).
Turn muting off. (> 26)
Check the connections to the other devices.
(> 22, 23)
Make sure that the received audio signal is
compatible with this system. (> 35)
Turn this system off and then on again.
If the main unit is connected to the TV with only
an HDMI cable, make sure that the TV’s HDMI
HDMI
Bluetooth
®
Sound
SC-HTB570_RQT9785-B_mst.book 32 ページ 2013年1月10日 木曜日 午後2時56分
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB570 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB570

Panasonic SC-HTB570 Quick start guide - English - 2 pages

Panasonic SC-HTB570 User Manual - German - 116 pages

Panasonic SC-HTB570 User Manual - German, Dutch - 52 pages

Panasonic SC-HTB570 User Manual - Dutch - 116 pages

Panasonic SC-HTB570 User Manual - Danish - 52 pages

Panasonic SC-HTB570 User Manual - Danish - 116 pages

Panasonic SC-HTB570 User Manual - French, Italian - 116 pages

Panasonic SC-HTB570 User Manual - Polish - 116 pages

Panasonic SC-HTB570 User Manual - Swedish - 116 pages

Panasonic SC-HTB570 User Manual - Spanish - 40 pages

Panasonic SC-HTB570 User Manual - Spanish - 116 pages

Panasonic SC-HTB570 User Manual - Spanish, Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info