734494
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
TQBJ2216
Sound
No sound
Cancel muting. (~18)
Check the connections to the other devices.
(~8, 9)
Make sure that the received audio signal is
compatible with this system.
If the system is connected to the TV with an HDMI
cable only, make sure that the HDMI terminal of the
TV is labelled “HDMI (ARC)”. If not, connect an
optical digital audio cable. (~8)
Check the connections. Change the cables if the
connections are correct.
Check the audio output settings on the connected
device.
The situation may improve by changing the digital
audio output setting on the connected device from
“Bitstream” to “PCM”.
The dual audio cannot be changed from main to
secondary.
If the audio received from the connected device is
not “Dual Mono” or the output setting is not
“Bitstream”, the setting cannot be changed from this
system. Change the setting on the connected
device.
The sound lags behind the image.
Depending on the TV, when this system is
connected to it via Bluetooth®, the sound output
from this system may lag behind the TV image.
Connect this system and the TV with an HDMI
cable/optical digital audio cable. (~8)
The audio format shown on the display does not
correspond to the playback source.
If the playback source is Dolby Digital or DTS®, set
the audio output setting of the connected equipment
(e.g., TV, player) to bitstream. For details, refer to
the operating instructions for the connected
equipment.
There is no audio.
The power of the main unit switches off
automatically.
(When the main unit detects a problem, a safety
measure is activated and the main unit automatically
switches to standby mode.)
There is a problem with the amplifier.
Is the volume extremely high?
If so, lower the volume.
Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a
few moments and then try to switch it on again.
If the problem persists, confirm the indicators status,
switch off this system, disconnect the AC mains lead
and consult your dealer. Please be sure to remember
the indicators status and inform the dealer.
Active subwoofer
[HTB600]
No power.
Make sure the AC mains lead of the active
subwoofer is connected.
After switching on the subwoofer, it immediately
switches off.
Disconnect the AC mains lead and consult your
dealer.
No sound from the subwoofer.
Check that the active subwoofer is switched on.
Check that the WIRELESS LINK indicator switched
on. (~17)
The WIRELESS LINK indicator does not switched
on.
There is no link between the main unit and the
active subwoofer.
Check that the main unit is switched on.
The active subwoofer and the main unit may not be
paired correctly. Try the following operation.
(Wireless pairing)
ASwitch on the main unit.
BPress and hold [I/D SET] on the rear of active
subwoofer for a minimum of 4 seconds.
The wireless link indicator will blink.
CSelect “SW PAIR” in the Setup Menu. (~19)
When the wireless pairing is successful, “DONE”
is shown and WIRELESS LINK indicator lights
up.
DSwitch off and then switch on the main unit.
Consult your dealer if the problem persists.
Display
“F61”
There is a problem with the amplifier of the system.
Disconnect the AC mains lead and consult the
dealer.
“F70 HDMI” / “U701” / “U703”
Check HDMI connection.
Switch off the main unit and then switch it on again.
Disconnect the HDMI cable.
“F703”
Switch off the main unit and then switch it on again.
Consult your dealer if the problem persists.
“LINK”
This system is trying to connect to the last
connected Bluetooth® device when “BT” is selected.
“REMOTE 1” / “REMOTE 2”
The remote control and the main unit are using
different codes. Change the code of the remote
control. (~23)
U702
There is a problem with the HDMI functionality,
consult your dealer for instructions.
htb600.400_TQBJ2216_en.fm Page 22 Thursday, May 14, 2020 2:22 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB400 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB400

Panasonic SC-HTB400 User Manual - German, Dutch, French, Italian, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info