618132
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
VQT5J46
Reference
Troubleshooting
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated in the following guide do not solve the
problem, consult your dealer for instructions.
No power.
Insert the AC mains lead securely. (> 10)
If the indicators blink and the main unit turns off
immediately after you have turned it on, unplug the AC
mains lead and consult your dealer.
The remote control does not work properly.
The battery is depleted. Replace it with a new one.
(> 8)
It is possible that the insulation sheet has not been
removed. Remove the insulation sheet. (> 8)
It may be necessary to set the code of the remote
control again after changing the battery of the remote
control. (> 19)
Use the remote control within the correct operation
range. (> 8)
The “TV” indicator blinks.
Unplug the AC mains lead and consult your dealer. If
other indicators are also blinking, be sure to inform your
dealer of these indicators.
The main unit is automatically switched to
standby mode.
“Auto Power Down” function is on.
The main unit will automatically switch to standby mode
when no signal is input and no operation is performed for
approx. 2 hours. Refer to page 18 to turn this function off.
Pairing cannot be done.
Check the Bluetooth
®
device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or the
registration has been replaced. Try pairing the device
again. (> 11)
This system might be connected to a different device.
Disconnect the other device and try pairing the device
again.
The device is connected but audio cannot be
heard through this system.
For some built-in Bluetooth
®
devices, you have to set the
audio output to “SC-HTB18” manually. Read the operating
instructions for the device for details.
The sound is interrupted.
The device is out of the 10 m communication range.
Bring the Bluetooth
®
device closer to the main unit.
Remove any obstacle between the main unit and the
device.
Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.) are
interfering. Bring the Bluetooth
®
device closer to the
main unit and distance it from the other devices.
No sound.
Turn muting off. (> 17)
Check the connections to the other device. (> 9)
Make sure that the received audio signal is compatible
with this system. (> 23)
Turn this system off and then on again.
If the connections are correct, there might be a problem
with the cables. Redo the connections with different
cables.
Check the audio output settings on the connected device.
The volume is lowered when the main unit is
turned on.
If the main unit is turned off with the volume setting in the
greater half (above 50), the main unit will automatically
lower the volume to the middle (50) when the main unit is
turned on. (> 19)
The dialog is too persistent or the dialog does
not sound natural.
This system has a function to make the dialog stand out
when the volume is low. (> 17)
To return to the factory defaults.
While the main unit is on, press and hold [Í/I] on
the main unit for more than 4 sec.
(All the indicators will blink twice when this
system is reset.)
If this system does not operate as expected,
returning the settings to the factory defaults
may solve the problem.
The remote control code will return to “1” when
this system is returned to the factory preset. To
change the remote control code, refer to page 19.
General operation
Bluetooth
®
Sound
SC-HTB18EGEB_VQT5J46-1.book 20 ページ 2015年2月4日 水曜日 午後3時18
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB18 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB18

Panasonic SC-HTB18 User Manual - German, Dutch - 112 pages

Panasonic SC-HTB18 User Manual - Danish - 112 pages

Panasonic SC-HTB18 User Manual - French, Italian - 112 pages

Panasonic SC-HTB18 User Manual - Polish, Swedish - 112 pages

Panasonic SC-HTB18 User Manual - Spanish - 112 pages

Panasonic SC-HTB18 User Manual - Finnish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info