734492
18
Zoom out
Zoom in
Previous page
1/25
Next page
Operation
18
(Factory default: Auto)
This function delays the output of audio when you can
perceive a difference between the images and audio
when playing back a connected device. Adjust the
level while checking whether the images and audio
match.
The delay time will not get shorter if you select a setting
value that is shorter than the time required to process
the audio signal. The time required for processing
signals depends on the audio format.
1 Press and hold [CLR DIALOG] on the remote
control for 4 or more seconds. (The LED
indicators indicate the current mode.)
2 Press [CLR DIALOG] while the current status is
being indicated (about 10 seconds).
Switch to a status where you can select a setting
other than “Not Auto(Minimum to 300 msec)”.
3 Press either [i SUBWOOFER] or
[SUBWOOFER j] while the current status is
being indicated.
The setting changes in the following order each time
you press [i SUBWOOFER]. (The setting changes in
the reverse order if you press [SUBWOOFER j].)
“Minimum” →”25 msec” → “50 msec” → “75 msec”
… → “300 msec” (Maximum)
The display returns to the normal one about
10 seconds after the operation.
To return the audio delay to “Auto”
Press [CLR DIALOG] in step 2.
• The (Bluetooth
®
) indicator lights and the setting
switches to “Auto”.
When set to “Auto”, if a Panasonic TV (VIEARA) that
supports VIERA Link (HDMI) Ver.3 or later is connected,
the audio is automatically delayed to bring it closer to
the images.
This operation is not available when input is “
(Bluetooth
®
)”.
(Factory default: Enabled)
This function limits the excessive output of volume.
When this function is used, if the volume exceeds 50
when this system is turned off, then the volume is set
to 50 when it is turned on again. You can set this
system not to use the function using the following
procedure.
1 Press and hold [VOL i] on this system and
[MUTE] on the remote control at the same time
for 4 or more seconds.
2 Confirm that all the LED indicators blink once.
To enable the volume limiting function again, return the
settings of this system to the factory defaults. (> 20)
Adjusting the difference between
images and audio (Audio delay
function)
Setting
value
(msec)
Indicators
Auto
Minimum
25 to 75
100 to 175
200 to 275
300
(Maximum)
Turning off the volume limitation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB01 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB01

Panasonic SC-HTB01 Quick start guide - English - 52 pages

Panasonic SC-HTB01 User Manual - German - 25 pages

Panasonic SC-HTB01 Quick start guide - German - 52 pages

Panasonic SC-HTB01 User Manual - Dutch - 25 pages

Panasonic SC-HTB01 Quick start guide - Dutch, French, Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info