734654
18
Zoom out
Zoom in
Previous page
1/32
Next page
18 TQBJ2019
Step 3 Wireless connections
Preparation
Turn on the main unit.
Check that the wireless link is activated.
WIRELESS LINK indicator
Lights:
The wireless link is activated.
Lights off:
The wireless link is not activated.
Blinks:
The active subwoofer is trying to activate the
wireless link with the main unit.
The wireless link will be activated when the main unit and
the active subwoofer are both turned on.
The I/D SET button is only used when the main unit is not
paired with the active subwoofer. (24)
By using the Bluetooth® connection, you can listen
to the sound from the Bluetooth® audio device
from this system wirelessly.
Refer to the operating instructions of the Bluetooth
®
device for
further instruction on how to connect a Bluetooth
®
device.
Preparation
Turn on the Bluetooth® feature of the device and
place the device near the main unit.
Press [ -PAIRING] to select “ ”.
If the “ ” indicator starts blinking quickly, go to step 3.
Press and hold [ -PAIRING] until
the “ ” indicator blinks quickly.
If the “ ” indicator blinks slowly, repeat step 2.
Select “SC-HTB688”, “SC-HTB498” or
“SC-HTB488” from the Bluetooth
®
device’s Bluetooth
®
menu.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may be
displayed before “SC-HTB688”, “SC-HTB498” or “SC-
HTB488” is displayed.
If prompted for the passkey on the Bluetooth® device, enter
“0000” or “1234”.
Once the Bluetooth
®
device is connected, the
indicator
stops blinking and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Press [ -PAIRING] to select “ ”.
If the
indicator lights, a Bluetooth
®
device is already
connected with this system. Disconnect it. (
below)
Select “SC-HTB688”, “SC-HTB498” or
“SC-HTB488” from the Bluetooth
®
device’s Bluetooth
®
menu.
Disconnecting a Bluetooth® device
Press and hold [ -PAIRING] until the “
indicator blinks slowly.
When “ ” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth® device. If the connection attempt fails, try to
establish a connection again.
The Bluetooth® device will be disconnected if a different
audio source (e.g. “HDMI (ARC)”) is selected.
This system can only be connected to one device at a time.
Active subwoofer
wireless connection
Bluetooth® connection
Bluetooth® pairing
Connecting a paired
Bluetooth® device
SC-HTB488_688_EGEBGN_TQBJ2019.book 18 ージ 207年月8 水日 後57分
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HT498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HT498 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info