734655
21
Zoom out
Zoom in
Previous page
1/32
Next page
Operations
TQBJ2019 21
The main unit is automatically turned off if there is no audio
input and when you do not use it for approx. 20 minutes.
Press and hold [HDMI (ARC)] for
more than 4 sec. to select the mode.
Depending on the mode, the indicator will blink as below.
The indicator for the selected setting blinks for 5 sec. and
then exits the setting mode.
The setting is maintained until it is changed again.
This function allows you to connect a paired Bluetooth
®
device when the main unit is in standby mode.
Press and hold [OPTICAL] for more
than 4 sec. to select the mode.
Depending on the mode, the indicator will blink as below.
The indicator for the selected setting blinks for 5 sec. and
then exits the setting mode.
The setting is maintained until it is changed again.
If the AC mains lead is unplugged, the Bluetooth® standby
function may not work. Make the setting again.
You can turn off dimmer mode and keep the LED
indicators bright.
Press and hold [SURROUND] for more
than 4 sec. to turn off the mode.
The indicator for the current condition will turn brighter.
The setting is maintained until it is changed again.
Default setting of this function is on.
To turn on dimmer mode, repeat the operation above. After performing
the operation, the indicator for the current condition will be dim.
If a state of the lowered volume disturbs you every
time the main unit turns on, for example, it is
possible to turn off this function as follows:
Press
[SURROUND], [SOUND]*,
[SURROUND]*, [SOUND]* consecutively.
* Within 3 sec.
Depending on the mode, the indicator will blink as
below.
To turn on Volume limitation, repeat the operation above.
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
Preparation
Turn off all other Panasonic products.
Turn on the main unit.
To set the code to code 2
1 Aim the remote control at the main unit’s
remote control signal sensor.
2 Press and hold
[SOUND]
and
[ -PAIRING]
on the remote control for more than
4sec.
Depending on the mode, the indicator will blink as
below.
To select the code 1, press and hold [SOUND] and
[OPTICAL] for more than 4 sec.
Auto power down
Mode Indicator
On
Off
Bluetooth® standby
Mode Indicator
On
Off
Dimmer mode
Volume limitation
Mode Indicator
On
Off
Remote control code
Code Indicator
Code 1
Code 2
SC-HTB488_688_EGEBGN_TQBJ2019.book 21 ージ 207年月8 水日 後57分
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HT488 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HT488 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info